[Sat May 4 06:28:09 2013] Detection parameters: Position = (295.9, 256.3) = 10 17 4.02 39 1 36.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 516.3 +/- 29.7 Background counts = 71.9 Rate = 0.03 +/- 0.002 [Sat May 4 06:28:10 2013] Off-axis axis estimate = 3.06' [Sat May 4 06:30:31 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting [Sat May 4 06:30:31 2013] Initial guess for spatial extent in simple fitting = 7.96" [Sat May 4 06:30:31 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921 [Sat May 4 06:30:31 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.96" [Sat May 4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src13.ximg exists [Sat May 4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src13.csv [Sat May 4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src13_1.ximg exists [Sat May 4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src13.csv [Sat May 4 07:41:41 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Sat May 4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src13.csv [Sat May 4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Sat May 4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src13.csv [Sat May 4 07:41:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 11:23:29 2013] Source 13 is offset by -0.970616 and 0.421901 pixels which is larger than 2 X fitted extent = 0.892800 x 0.892800, not incorporating fit results [Sat May 4 11:23:29 2013] Source 13 is offset by -1.767719 and -5.712558 pixels which is larger than 2 X fitted extent = 4.692736 x 4.692736, not incorporating fit results [Sat May 4 11:23:29 2013] Vigneting correction estimate = 1.000000 [Sat May 4 11:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 11:23:29 2013] Assessing source extent using major [Sat May 4 11:23:29 2013] Source does appear to be extended [Sat May 4 11:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 11:23:58 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting [Sat May 4 11:23:58 2013] Initial guess for spatial extent in simple fitting = 7.96" [Sat May 4 11:23:58 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921 [Sat May 4 11:23:58 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.96" [Sat May 4 12:23:47 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src12.ximg exists [Sat May 4 12:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src12.csv [Sat May 4 12:23:47 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src12_1.ximg exists [Sat May 4 12:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src12.csv [Sat May 4 12:23:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Sat May 4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src12.csv [Sat May 4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Sat May 4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src12.csv [Sat May 4 12:23:48 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 14:38:22 2013] Source 13 is offset by -0.970616 and 0.421901 pixels which is larger than 2 X fitted extent = 0.892800 x 0.892800, not incorporating fit results [Sat May 4 14:38:22 2013] Source 13 is offset by 3.384557 and 6.595763 pixels which is larger than 2 X fitted extent = 0.914892 x 3.002515, not incorporating fit results [Sat May 4 14:38:22 2013] Vigneting correction estimate = 1.000000 [Sat May 4 14:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 14:38:22 2013] Assessing source extent using major [Sat May 4 14:38:22 2013] Source does appear to be extended [Sat May 4 14:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 14:38:45 2013] XMMSAS src. selection expression = ellipse(25693.668427, 22247.817413, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 14:38:45 2013] Writing source region out to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13_src.reg [Sat May 4 14:38:45 2013] Extracting stamp from image fullrun_pn_xmm0084230701_pi300-10000_cl_sm2.00.img.gz, (258, 219) - (333, 294) [Sat May 4 14:38:45 2013] XMMSAS bgd. selection expression = annulus(25693.668427, 22247.817413, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.095000, 23841.730600, 1165.000034, 1082.696031, 91.849680, X, Y) && !ellipse(26917.477631, 23058.472198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26370.836304, 22734.842712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.696991, 23341.673553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28222.243988, 23089.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23687.095520, 22735.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23572.000000, 22239.130157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24745.254791, 21454.486694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.948944, 20933.496933, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 14:38:45 2013] Writing fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13.gif [Sat May 4 14:46:36 2013] Mean detx,y = (1021.66, -1616.15) [Sat May 4 14:46:37 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 14:46:48 2013] Binned source spectrum to 10 counts/bin [Sat May 4 14:46:48 2013] Setting source spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Sat May 4 14:46:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13_bgd.pi.gz [Sat May 4 15:09:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 4 15:09:09 2013] rmf not generated due to insufficient counts [Sat May 4 16:58:10 2013] Updating aperture counts using extracted products [Sat May 4 16:58:10 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 1733.00 [Sat May 4 16:58:10 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13_bgd.pi.gz = 2722.00 [Sat May 4 16:58:10 2013] Got source and background scale factors 914948.000000, 2650438.000000 [Sat May 4 16:58:10 2013] User source parameters: Position = (295.9, 256.3) = 10 17 4.02 39 1 36.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 793.3 +/- 42.6 Background aperture counts = 939.7 Rate = 0.04 +/- 0.002 [Sat May 4 16:58:10 2013] Updating counts from extracted products [Sat May 4 16:58:10 2013] Set source signif. to 793.35/30.65 = 25.88 [Sat May 4 16:58:13 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 16:58:13 2013] Using photon index=1.80, rate=0.0356, arf fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13.arf [Sat May 4 16:58:13 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 16:58:13 2013] Updating source flux to 1e-13 [Sat May 4 16:58:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 16:58:31 2013] xmm0084230701/analysis//spectral/fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete