[Sun Jul 15 05:46:04 2012] Detection parameters:
  Position = (334.5, 310.1) = 9 17 38.07 51 42 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.9 +/- 18.7
  Background counts = 54.2
  Rate = 0.008 +/- 0.001

[Sun Jul 15 05:46:05 2012] Off-axis axis estimate = 2.74'
[Sun Jul 15 05:48:02 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 05:48:02 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Sun Jul 15 05:48:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Sun Jul 15 05:48:02 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.80"
[Sun Jul 15 07:58:15 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src29.ximg exists
[Sun Jul 15 07:58:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src29.csv
[Sun Jul 15 07:58:15 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Jul 15 07:58:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src29.csv
[Sun Jul 15 07:58:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 07:58:16 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Jul 15 07:58:16 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Jul 15 07:58:16 2012] Fit fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Jul 15 11:13:10 2012] Source 30 is offset by 0.736313 and -3.466510 pixels which is larger than
2 X fitted extent = 0.896648 x 0.896648, not incorporating fit results
[Sun Jul 15 11:13:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:10 2012] Assessing source extent using major
[Sun Jul 15 11:13:10 2012] Source does appear to be extended
[Sun Jul 15 11:13:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 11:13:10 2012] Source is confused with source 28
[Sun Jul 15 11:13:39 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:13:39 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Sun Jul 15 11:13:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Sun Jul 15 11:13:39 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.80"
[Sun Jul 15 12:45:43 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jul 15 12:45:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src20.csv
[Sun Jul 15 12:45:43 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jul 15 12:45:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src20.csv
[Sun Jul 15 12:45:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:45:44 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jul 15 12:45:44 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jul 15 12:45:44 2012] Fit fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jul 15 16:27:24 2012] Spatial fit model total counts = 965.916000, observed total counts = 869.000000
[Sun Jul 15 16:27:24 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 16:27:24 2012] Source 30 is offset by 7.267000 and 5.547352 pixels which is larger than
2 X fitted extent = 0.899816 x 0.899816, not incorporating fit results
[Sun Jul 15 16:27:24 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:27:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:27:24 2012] Assessing source extent using major
[Sun Jul 15 16:27:24 2012] Source does appear to be extended
[Sun Jul 15 16:27:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:27:47 2012] XMMSAS src. selection expression = ellipse(29049.421021, 26927.975616, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 16:27:47 2012] Writing source region out to fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src30_src.reg
[Sun Jul 15 16:27:47 2012] Extracting stamp from image fullrun_pn_xmm0084230601_pi300-10000_cl_sm2.00.img.gz, (297, 273) - (372, 348)
[Sun Jul 15 16:27:47 2012] XMMSAS bgd. selection expression = annulus(29049.421021, 26927.975616, 1087.500000, 2175.000000, X, Y) && !ellipse(26079.154800, 28192.841200, 1177.432034, 1177.432034, 0.000000, X, Y) && !ellipse(27801.282000, 27170.286000, 791.498423, 791.498423, 0.000000, X, Y) && !ellipse(27886.847412, 29943.406555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.075531, 29504.567383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29446.581543, 27596.936798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29476.660370, 26990.732544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28586.202000, 26637.814000, 1589.408046, 1589.408046, 0.000000, X, Y) && !ellipse(28339.790100, 25631.617737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29730.919250, 25429.641693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27803.837921, 25259.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26983.929000, 24535.788000, 1117.424032, 1117.424032, 0.000000, X, Y) && !ellipse(28462.251400, 24656.194000, 456.840813, 456.840813, 0.000000, X, Y)
[Sun Jul 15 16:27:47 2012] Writing fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src30.gif
[Sun Jul 15 16:41:12 2012] Mean detx,y = (2168.10, 1717.59) 
[Sun Jul 15 16:41:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 16:41:32 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 16:41:32 2012] Setting source spectrum file to fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jul 15 16:41:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jul 15 19:14:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 19:14:44 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:26:30 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:26:30 2012] Error reading totcts from fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jul 15 22:26:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:26:31 2012] Using photon index=1.80, rate=0.0079, arf fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src30.arf
[Sun Jul 15 22:26:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:26:31 2012] Updating source flux to 2e-14
[Sun Jul 15 22:28:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting