[Sun Jul 15 05:46:04 2012] Detection parameters:
  Position = (308.2, 339.7) = 9 17 50.34 51 44 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.3 +/- 23.1
  Background counts = 66.2
  Rate = 0.02 +/- 0.002

[Sun Jul 15 05:46:05 2012] Off-axis axis estimate = 3.07'
[Sun Jul 15 05:48:02 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 05:48:02 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sun Jul 15 05:48:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.966
[Sun Jul 15 05:48:02 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.97"
[Sun Jul 15 07:58:15 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jul 15 07:58:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src20.csv
[Sun Jul 15 07:58:15 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jul 15 07:58:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src20.csv
[Sun Jul 15 07:58:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 07:58:16 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jul 15 07:58:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jul 15 07:58:16 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jul 15 07:58:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jul 15 07:58:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:13:10 2012] Source 21 is offset by -4.592925 and 6.015050 pixels which is larger than
2 X fitted extent = 3.559770 x 3.559770, not incorporating fit results
[Sun Jul 15 11:13:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:10 2012] Assessing source extent using major
[Sun Jul 15 11:13:10 2012] Source does appear to be extended
[Sun Jul 15 11:13:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 11:13:39 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:13:39 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sun Jul 15 11:13:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.966
[Sun Jul 15 11:13:39 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.97"
[Sun Jul 15 12:45:43 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jul 15 12:45:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src13.csv
[Sun Jul 15 12:45:43 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jul 15 12:45:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src13.csv
[Sun Jul 15 12:45:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:45:44 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jul 15 12:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jul 15 12:45:44 2012] fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jul 15 12:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jul 15 12:45:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:27:24 2012] Source 21 is offset by -4.600028 and 6.015050 pixels which is larger than
2 X fitted extent = 3.550074 x 3.550074, not incorporating fit results
[Sun Jul 15 16:27:24 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:27:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:27:24 2012] Assessing source extent using major
[Sun Jul 15 16:27:24 2012] Source does appear to be extended
[Sun Jul 15 16:27:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:27:46 2012] XMMSAS src. selection expression = ellipse(26767.075531, 29504.567383, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 16:27:46 2012] Writing source region out to fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src21_src.reg
[Sun Jul 15 16:27:46 2012] Extracting stamp from image fullrun_pn_xmm0084230601_pi300-10000_cl_sm2.00.img.gz, (271, 302) - (346, 377)
[Sun Jul 15 16:27:46 2012] XMMSAS bgd. selection expression = annulus(26767.075531, 29504.567383, 1087.500000, 2175.000000, X, Y) && !ellipse(26079.154800, 28192.841200, 1177.432034, 1177.432034, 0.000000, X, Y) && !ellipse(27801.282000, 27170.286000, 791.498423, 791.498423, 0.000000, X, Y) && !ellipse(24937.720520, 28758.512115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25879.159393, 29080.288391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27886.847412, 29943.406555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.940735, 30032.761566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.712128, 29691.553131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23885.006714, 29795.731171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23855.012848, 29183.284943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.899628, 28536.169342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29446.581543, 27596.936798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29476.660370, 26990.732544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.421021, 26927.975616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23993.435455, 26912.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28586.202000, 26637.814000, 1589.408046, 1589.408046, 0.000000, X, Y)
[Sun Jul 15 16:27:46 2012] Writing fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src21.gif
[Sun Jul 15 16:37:41 2012] Mean detx,y = (1167.31, -1456.34) 
[Sun Jul 15 16:37:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 16:38:02 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 16:38:02 2012] Setting source spectrum file to fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jul 15 16:38:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Jul 15 19:03:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 19:03:19 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:26:30 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:26:30 2012] Error reading totcts from fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jul 15 22:26:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:26:31 2012] Using photon index=1.80, rate=0.0185, arf fullrun_pn_xmm0084230601_pi300-10000_pass1_cl_src21.arf
[Sun Jul 15 22:26:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:26:31 2012] Updating source flux to 5.2e-14
[Sun Jul 15 22:28:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting