[Sun Jul 15 05:46:51 2012] Detection parameters:
  Position = (311.1, 329.0) = 9 17 48.99 51 44 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.4 +/- 22.5
  Background counts = 21.6
  Rate = 0.02 +/- 0.001

[Sun Jul 15 05:46:52 2012] Off-axis axis estimate = 2.40'
[Sun Jul 15 09:33:50 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:33:50 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Jul 15 09:33:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.591
[Sun Jul 15 09:33:50 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.63"
[Sun Jul 15 11:12:53 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jul 15 11:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src4.csv
[Sun Jul 15 11:12:53 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jul 15 11:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src4.csv
[Sun Jul 15 11:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:12:54 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jul 15 11:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jul 15 11:12:54 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jul 15 11:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jul 15 11:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:13:26 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Sun Jul 15 11:13:26 2012] Spatial fit model total counts = 993.931000, observed total counts = 818.000000
[Sun Jul 15 11:13:26 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 11:13:26 2012] Spatial fit model total counts = 716.595000, observed total counts = 713.000000
[Sun Jul 15 11:13:26 2012] Offset between fit and detection position for source 6 = 3.469012 pixels
[Sun Jul 15 11:13:26 2012] Warning, changing simple spatial fit ID from 4 to 14
[Sun Jul 15 11:13:26 2012] 672.083300 total counts/ 624.537000 bgd. counts: snr = 1.902557
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.469012 pixels
  Position = (313.7, 326.7) = 9 17 47.78 51 44 0.1
  Extent = 9.8 (2.4-15.9)", rotation angle = 0
  Source counts = 47.5 +/- 25.9
  Background counts = 624.5
  Rate = 0.003 +/- 0.002
[Sun Jul 15 11:13:26 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:26 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 11:13:26 2012] Source does appear to be extended
[Sun Jul 15 11:13:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 11:13:26 2012] Source is confused with source 3
[Sun Jul 15 14:54:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 14:54:35 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Sun Jul 15 14:54:35 2012] source mask rpix=2.2, npix_max = 30, mask sum = 23, frac = 0.763
[Sun Jul 15 14:54:35 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.77"
[Sun Jul 15 16:27:13 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jul 15 16:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src4.csv
[Sun Jul 15 16:27:13 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jul 15 16:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src4.csv
[Sun Jul 15 16:27:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:27:14 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jul 15 16:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jul 15 16:27:14 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jul 15 16:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jul 15 16:27:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:27:36 2012] Spatial fit model total counts = 2307.970000, observed total counts = 1911.000000
[Sun Jul 15 16:27:36 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 16:27:36 2012] Spatial fit model total counts = 714.056000, observed total counts = 713.000000
[Sun Jul 15 16:27:36 2012] Offset between fit and detection position for source 6 = 0.000000 pixels
[Sun Jul 15 16:27:36 2012] Warning, changing simple spatial fit ID from 4 to 14
[Sun Jul 15 16:27:36 2012] 670.208300 total counts/ 621.192000 bgd. counts: snr = 1.966652
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000000 pixels
  Position = (313.7, 326.7) = 9 17 47.78 51 44 0.1
  Extent = 9.6 (2.1-15.9)", rotation angle = 0
  Source counts = 49.0 +/- 25.9
  Background counts = 621.2
  Rate = 0.003 +/- 0.002
[Sun Jul 15 16:27:36 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:27:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:27:36 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:27:36 2012] Source does appear to be extended
[Sun Jul 15 16:27:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 22:06:32 2012] XMMSAS src. selection expression = ellipse(27244.232000, 28375.232000, 573.965417, 573.965417, 0.000000, X, Y)
[Sun Jul 15 22:06:32 2012] Writing source region out to fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 15 22:06:32 2012] Extracting stamp from image fullrun_mos2_xmm0084230601_pi300-10000_cl_sm2.00.img.gz, (281, 294) - (347, 360)
[Sun Jul 15 22:06:32 2012] XMMSAS bgd. selection expression = annulus(27244.232000, 28375.232000, 956.609028, 1913.218055, X, Y) && !ellipse(26551.136000, 27678.392000, 1159.800033, 1159.800033, 0.000000, X, Y) && !ellipse(27431.268000, 27817.862000, 842.120024, 842.120024, 0.000000, X, Y) && !ellipse(27794.072723, 27362.619843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28058.983582, 28302.810852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.261078, 26151.480438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.520203, 29496.546539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26822.170044, 29268.224640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.336304, 28922.898254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.040985, 27232.759705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25132.770000, 26378.924000, 1236.064036, 1236.064036, 0.000000, X, Y) && !ellipse(24905.128000, 27807.239800, 1122.768032, 1122.768032, 0.000000, X, Y) && !ellipse(28562.053223, 27375.642761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25723.455200, 25716.265381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27848.909698, 26350.703217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.062000, 25941.086000, 1090.832031, 1090.832031, 0.000000, X, Y)
[Sun Jul 15 22:06:32 2012] Writing fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src6.gif
[Sun Jul 15 22:08:52 2012] Mean detx,y = (-941.05, 105.21) 
[Sun Jul 15 22:08:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 22:09:00 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 22:09:00 2012] Setting source spectrum file to fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 15 22:09:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jul 15 22:23:23 2012] Not generating rmf since there are only 49 counts
[Sun Jul 15 22:23:23 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:26:32 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:26:32 2012] Error reading totcts from fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 15 22:26:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:26:32 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src6.arf
[Sun Jul 15 22:26:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:26:32 2012] Updating source flux to 3e-14
[Sun Jul 15 22:27:59 2012] Flag p found in src. 6 procflags, skipping spectral fitting
[Sun Jul 15 22:27:59 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Sun Jul 15 22:27:59 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting