[Sun Jul 15 05:46:51 2012] Detection parameters:
  Position = (305.2, 320.0) = 9 17 51.76 51 43 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 869.7 +/- 36.5
  Background counts = 21.7
  Rate = 0.05 +/- 0.002

[Sun Jul 15 05:46:52 2012] Off-axis axis estimate = 1.64'
[Sun Jul 15 09:33:50 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:33:50 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jul 15 09:33:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sun Jul 15 09:33:50 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.25"
[Sun Jul 15 11:12:53 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jul 15 11:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src2.csv
[Sun Jul 15 11:12:53 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jul 15 11:12:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src2.csv
[Sun Jul 15 11:12:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:12:54 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jul 15 11:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jul 15 11:12:54 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jul 15 11:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jul 15 11:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:13:26 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.280144 pixels away
[Sun Jul 15 11:13:26 2012] Spatial fit model total counts = 2418.550000, observed total counts = 2003.000000
[Sun Jul 15 11:13:26 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 11:13:26 2012] Spatial fit model total counts = 2157.550000, observed total counts = 1798.000000
[Sun Jul 15 11:13:26 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 11:13:26 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:26 2012] Assessing source extent using major
[Sun Jul 15 11:13:26 2012] Source does appear to be extended
[Sun Jul 15 11:13:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 14:54:35 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 14:54:35 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jul 15 14:54:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sun Jul 15 14:54:35 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.25"
[Sun Jul 15 16:27:13 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jul 15 16:27:13 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jul 15 16:27:13 2012] Fit fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Jul 15 16:27:13 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jul 15 16:27:13 2012] fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jul 15 16:27:14 2012] Fit fullrun_mos2_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jul 15 16:27:36 2012] Spatial fit model total counts = 3684.280000, observed total counts = 3390.000000
[Sun Jul 15 16:27:36 2012] Offset between fit and detection position for source 2 = 1.426948 pixels
[Sun Jul 15 16:27:36 2012] 3612.694000 total counts/ 2809.500000 bgd. counts: snr = 15.153255
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.426948 pixels
  Position = (305.7, 318.7) = 9 17 51.51 51 43 25.2
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 803.2 +/- 60.1
  Background counts = 2809.5
  Rate = 0.05 +/- 0.004
[Sun Jul 15 16:27:36 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:27:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:27:36 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:27:36 2012] Source does appear to be extended
[Sun Jul 15 16:27:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 22:06:32 2012] XMMSAS src. selection expression = ellipse(26551.136000, 27678.392000, 869.850025, 869.850025, 0.000000, X, Y)
[Sun Jul 15 22:06:32 2012] Writing source region out to fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 15 22:06:32 2012] Extracting stamp from image fullrun_mos2_xmm0084230601_pi300-10000_cl_sm2.00.img.gz, (256, 269) - (356, 369)
[Sun Jul 15 22:06:32 2012] XMMSAS bgd. selection expression = annulus(26551.136000, 27678.392000, 1449.750042, 2899.500083, X, Y) && !ellipse(27431.268000, 27817.862000, 842.120024, 842.120024, 0.000000, X, Y) && !ellipse(27244.232000, 28375.232000, 765.287222, 765.287222, 0.000000, X, Y) && !ellipse(27794.072723, 27362.619843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28058.983582, 28302.810852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.261078, 26151.480438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.520203, 29496.546539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26822.170044, 29268.224640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24041.784000, 28767.128000, 1283.960037, 1283.960037, 0.000000, X, Y) && !ellipse(27893.336304, 28922.898254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.040985, 27232.759705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24304.806671, 27668.065033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25132.770000, 26378.924000, 1236.064036, 1236.064036, 0.000000, X, Y) && !ellipse(24905.128000, 27807.239800, 1122.768032, 1122.768032, 0.000000, X, Y) && !ellipse(28562.053223, 27375.642761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25723.455200, 25716.265381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27848.909698, 26350.703217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23872.485596, 26492.680908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.062000, 25941.086000, 1090.832031, 1090.832031, 0.000000, X, Y)
[Sun Jul 15 22:06:32 2012] Writing fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2.gif
[Sun Jul 15 22:08:28 2012] Mean detx,y = (-18.93, -159.71) 
[Sun Jul 15 22:08:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 22:08:39 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 22:08:39 2012] Setting source spectrum file to fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 22:08:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 15 22:26:32 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:26:32 2012] Error reading totcts from fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 22:26:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:26:32 2012] Using photon index=1.80, rate=0.0483, arf fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 22:26:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:26:32 2012] Updating source flux to 5.2e-13
[Sun Jul 15 22:27:59 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Sun Jul 15 22:28:17 2012] Reading fit data from xmm0084230601/analysis//spectral/fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jul 15 22:28:17 2012] Spectral fit parameter nH value = 5.8936e+20
[Sun Jul 15 22:28:17 2012] Spectral fit parameter PhoIndex value = 1.76371
[Sun Jul 15 22:28:17 2012] Failed to get F(0.3-8.0) from xmm0084230601/analysis//spectral/fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 22:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:28:17 2012] Using Nh = 5.9e+20, photon index=1.76, rate=0.0483, arf fullrun_mos2_xmm0084230601_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 22:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:28:17 2012] Updating source flux to 5.5e-13