[Sun Jul 15 05:46:26 2012] Detection parameters:
  Position = (313.4, 284.8) = 9 17 47.92 51 40 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.2 +/- 8.6
  Background counts = 9.6
  Rate = 0.002 +/- 0.0006

[Sun Jul 15 05:46:26 2012] Off-axis axis estimate = 1.47'
[Sun Jul 15 07:58:17 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 07:58:17 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Sun Jul 15 07:58:17 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.085
[Sun Jul 15 07:58:17 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.16"
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jul 15 09:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src38.csv
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jul 15 09:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src38.csv
[Sun Jul 15 09:33:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:33:50 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jul 15 09:33:50 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jul 15 09:33:50 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Jul 15 11:13:19 2012] Spatial fit model total counts = 197.985000, observed total counts = 197.000000
[Sun Jul 15 11:13:19 2012] Offset between fit and detection position for source 43 = 6.869913 pixels
[Sun Jul 15 11:13:19 2012] 208.070200 total counts/ 169.360000 bgd. counts: snr = 2.974541
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 6.869913 pixels
  Position = (307.4, 281.5) = 9 17 50.73 51 40 43.4
  Extent = 14.3 (4.1-28.7)", rotation angle = 0
  Source counts = 38.7 +/- 14.4
  Background counts = 169.4
  Rate = 0.003 +/- 0.001
[Sun Jul 15 11:13:19 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:19 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 11:13:19 2012] Source does appear to be extended
[Sun Jul 15 11:13:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 11:13:19 2012] Source is confused with source 41
[Sun Jul 15 12:45:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 12:45:44 2012] Initial guess for spatial extent in simple fitting = 14.33"
[Sun Jul 15 12:45:44 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.851
[Sun Jul 15 12:45:44 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 14.33"
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src29.ximg exists
[Sun Jul 15 14:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src29.csv
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Jul 15 14:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src29.csv
[Sun Jul 15 14:54:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 14:54:35 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Jul 15 14:54:35 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Jul 15 14:54:35 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Jul 15 16:27:30 2012] Warning, spatial fit 29 centroid is now closest to src. 41
[Sun Jul 15 16:27:30 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:27:30 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:27:30 2012] Source does appear to be extended
[Sun Jul 15 16:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 19:35:22 2012] XMMSAS src. selection expression = ellipse(26696.584000, 24441.458000, 859.524025, 859.524025, 0.000000, X, Y)
[Sun Jul 15 19:35:22 2012] Writing source region out to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src43_src.reg
[Sun Jul 15 19:35:22 2012] Extracting stamp from image fullrun_mos1_xmm0084230601_pi300-10000_cl_sm2.00.img.gz, (258, 232) - (357, 331)
[Sun Jul 15 19:35:22 2012] XMMSAS bgd. selection expression = annulus(26696.584000, 24441.458000, 1432.540041, 2865.080082, X, Y) && !ellipse(26080.335400, 28210.826600, 1177.072034, 1177.072034, 0.000000, X, Y) && !ellipse(27694.145386, 27350.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27254.314000, 26647.618000, 2285.200066, 2285.200066, 0.000000, X, Y) && !ellipse(27820.472000, 28129.360000, 2181.328063, 2181.328063, 0.000000, X, Y) && !ellipse(26242.594000, 25945.124000, 1082.752031, 1082.752031, 0.000000, X, Y) && !ellipse(28342.344000, 26964.792000, 2415.632070, 2415.632070, 0.000000, X, Y) && !ellipse(25431.001068, 26585.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.890000, 28952.108000, 2530.976073, 2530.976073, 0.000000, X, Y) && !ellipse(24306.590851, 27190.287201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.405701, 26766.977295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27995.822000, 25004.012000, 2338.368067, 2338.368067, 0.000000, X, Y) && !ellipse(23870.520000, 29300.944000, 2023.312058, 2022.696058, 246.373000, X, Y) && !ellipse(23677.155090, 26605.052368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.036652, 25652.613708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28878.182000, 25977.050000, 1208.664035, 1208.664035, 0.000000, X, Y)
[Sun Jul 15 19:35:22 2012] Writing fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src43.gif
[Sun Jul 15 19:45:47 2012] Mean detx,y = (-3041.37, -1149.08) 
[Sun Jul 15 19:45:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 19:45:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 19:45:54 2012] Setting source spectrum file to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jul 15 19:45:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Jul 15 22:06:27 2012] Not generating rmf since there are only 38 counts
[Sun Jul 15 22:06:27 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:26:32 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:26:32 2012] Error reading totcts from fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jul 15 22:26:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:26:32 2012] Using photon index=1.80, rate=0.00262, arf fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src43.arf
[Sun Jul 15 22:26:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:26:32 2012] Updating source flux to 2.7e-14
[Sun Jul 15 22:26:34 2012] Flag c found in src. 43 procflags, skipping spectral fitting
[Sun Jul 15 22:26:34 2012] Source 43 has fewer than 100.000000 counts, skipping spectral fitting