[Sun Jul 15 05:46:26 2012] Detection parameters:
  Position = (319.5, 286.5) = 9 17 45.07 51 41 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.1 +/- 8.8
  Background counts = 9.7
  Rate = 0.002 +/- 0.0007

[Sun Jul 15 05:46:26 2012] Off-axis axis estimate = 1.76'
[Sun Jul 15 07:58:17 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 07:58:17 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 15 07:58:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.315
[Sun Jul 15 07:58:17 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.31"
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src40.ximg exists
[Sun Jul 15 09:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src40.csv
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src40_1.ximg exists
[Sun Jul 15 09:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src40.csv
[Sun Jul 15 09:33:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:33:50 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sun Jul 15 09:33:50 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sun Jul 15 09:33:50 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Sun Jul 15 11:13:19 2012] Spatial fit model total counts = 218.573000, observed total counts = 218.000000
[Sun Jul 15 11:13:19 2012] Offset between fit and detection position for source 41 = 4.878661 pixels
[Sun Jul 15 11:13:19 2012] 221.669600 total counts/ 163.242000 bgd. counts: snr = 4.573009
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 4.878661 pixels
  Position = (315.1, 284.4) = 9 17 47.14 51 40 56.1
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source counts = 58.4 +/- 14.9
  Background counts = 163.2
  Rate = 0.004 +/- 0.001
[Sun Jul 15 11:13:19 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:19 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 11:13:19 2012] Source does appear to be extended
[Sun Jul 15 11:13:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 11:13:19 2012] Source is confused with source 43
[Sun Jul 15 12:45:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 12:45:44 2012] Initial guess for spatial extent in simple fitting = 14.61"
[Sun Jul 15 12:45:44 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.940
[Sun Jul 15 12:45:44 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 14.61"
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src31.ximg exists
[Sun Jul 15 14:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src31.csv
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src31_1.ximg exists
[Sun Jul 15 14:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src31.csv
[Sun Jul 15 14:54:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 14:54:35 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sun Jul 15 14:54:35 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Jul 15 14:54:35 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sun Jul 15 16:27:30 2012] Spatial fit model total counts = 257.720000, observed total counts = 256.000000
[Sun Jul 15 16:27:30 2012] Offset between fit and detection position for source 41 = 1.998793 pixels
[Sun Jul 15 16:27:30 2012] Warning, changing simple spatial fit ID from 31 to 29
[Sun Jul 15 16:27:30 2012] 253.837700 total counts/ 236.757000 bgd. counts: snr = 1.110080
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.998793 pixels
  Position = (313.1, 284.9) = 9 17 48.05 51 40 58.0
  Extent = 5.9 (3.6-10.6)", rotation angle = 0
  Source counts = 17.1 +/- 15.9
  Background counts = 236.8
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability