[Sun Jul 15 05:46:26 2012] Detection parameters:
  Position = (317.9, 301.2) = 9 17 45.82 51 42 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.6 +/- 12.1
  Background counts = 12.7
  Rate = 0.005 +/- 0.0009

[Sun Jul 15 05:46:26 2012] Off-axis axis estimate = 1.43'
[Sun Jul 15 07:58:17 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 07:58:17 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Sun Jul 15 07:58:17 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Sun Jul 15 07:58:17 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.14"
[Sun Jul 15 09:33:48 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jul 15 09:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src19.csv
[Sun Jul 15 09:33:48 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jul 15 09:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src19.csv
[Sun Jul 15 09:33:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jul 15 09:33:49 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Jul 15 11:13:19 2012] Spatial fit model total counts = 525.024000, observed total counts = 525.000000
[Sun Jul 15 11:13:19 2012] Offset between fit and detection position for source 34 = 4.628292 pixels
[Sun Jul 15 11:13:19 2012] 522.952900 total counts/ 474.406000 bgd. counts: snr = 2.228879
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 4.628292 pixels
  Position = (318.7, 296.6) = 9 17 45.43 51 41 49.1
  Extent = 14.3 (14.2-28.6)", rotation angle = 0
  Source counts = 48.5 +/- 22.9
  Background counts = 474.4
  Rate = 0.003 +/- 0.002
[Sun Jul 15 11:13:19 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:19 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 11:13:19 2012] Source does appear to be extended
[Sun Jul 15 11:13:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 12:45:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 12:45:44 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Sun Jul 15 12:45:44 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.978
[Sun Jul 15 12:45:44 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 14.28"
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jul 15 14:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src17.csv
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jul 15 14:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src17.csv
[Sun Jul 15 14:54:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 14:54:35 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jul 15 14:54:35 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jul 15 14:54:35 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Jul 15 16:27:30 2012] Warning, spatial fit 17 centroid is now closest to src. 3
[Sun Jul 15 16:27:30 2012] Spatial fit model total counts = 305.730000, observed total counts = 305.000000
[Sun Jul 15 16:27:30 2012] Offset between fit and detection position for source 34 = 9.373433 pixels
[Sun Jul 15 16:27:30 2012] Warning, changing simple spatial fit ID from 17 to 31
[Sun Jul 15 16:27:30 2012] 296.988000 total counts/ 164.185000 bgd. counts: snr = 10.364328
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 9.373433 pixels
  Position = (322.3, 288.0) = 9 17 43.74 51 41 11.5
  Extent = 29.2 (29.2-58.5)", rotation angle = 0
  Source counts = 132.8 +/- 17.2
  Background counts = 164.2
  Rate = 0.009 +/- 0.001
[Sun Jul 15 16:27:30 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:27:30 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:27:30 2012] Source does appear to be extended
[Sun Jul 15 16:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:27:30 2012] Source is confused with source 36
[Sun Jul 15 16:27:30 2012] Source is confused with source 33
[Sun Jul 15 16:27:30 2012] Source is confused with source 43
[Sun Jul 15 19:35:22 2012] XMMSAS src. selection expression = ellipse(27995.822000, 25004.012000, 1753.776050, 1753.776050, 0.000000, X, Y)
[Sun Jul 15 19:35:22 2012] Writing source region out to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src34_src.reg
[Sun Jul 15 19:35:22 2012] Extracting stamp from image fullrun_mos1_xmm0084230601_pi300-10000_cl_sm2.00.img.gz, (222, 187) - (423, 389)
[Sun Jul 15 19:35:22 2012] XMMSAS bgd. selection expression = annulus(27995.822000, 25004.012000, 2922.960084, 5845.920168, X, Y) && !ellipse(26080.335400, 28210.826600, 1177.072034, 1177.072034, 0.000000, X, Y) && !ellipse(27694.145386, 27350.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27254.314000, 26647.618000, 2285.200066, 2285.200066, 0.000000, X, Y) && !ellipse(24887.674000, 28602.970000, 1011.664029, 1011.664029, 0.000000, X, Y) && !ellipse(27820.472000, 28129.360000, 2181.328063, 2181.328063, 0.000000, X, Y) && !ellipse(26242.594000, 25945.124000, 1082.752031, 1082.752031, 0.000000, X, Y) && !ellipse(28342.344000, 26964.792000, 2415.632070, 2415.632070, 0.000000, X, Y) && !ellipse(25431.001068, 26585.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.890000, 28952.108000, 2530.976073, 2530.976073, 0.000000, X, Y) && !ellipse(24306.590851, 27190.287201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.405701, 26766.977295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.520000, 29300.944000, 2023.312058, 2022.696058, 246.373000, X, Y) && !ellipse(29125.538000, 28976.524000, 1276.080037, 1276.080037, 0.000000, X, Y) && !ellipse(23677.155090, 26605.052368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.036652, 25652.613708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28878.182000, 25977.050000, 1208.664035, 1208.664035, 0.000000, X, Y) && !ellipse(25039.788000, 30006.740000, 1265.488036, 1265.488036, 0.000000, X, Y) && !ellipse(26696.584000, 24441.458000, 1146.032033, 1146.032033, 0.000000, X, Y)
[Sun Jul 15 19:35:22 2012] Writing fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src34.gif
[Sun Jul 15 19:42:01 2012] Mean detx,y = (-2585.98, 227.56) 
[Sun Jul 15 19:42:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 19:43:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 19:43:14 2012] Setting source spectrum file to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Jul 15 19:43:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Jul 15 22:26:31 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:26:31 2012] Error reading totcts from fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Jul 15 22:26:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:26:32 2012] Using photon index=1.80, rate=0.00898, arf fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src34.arf
[Sun Jul 15 22:26:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:26:32 2012] Updating source flux to 8.5e-14
[Sun Jul 15 22:26:34 2012] Flag c found in src. 34 procflags, skipping spectral fitting