[Sun Jul 15 05:46:25 2012] Detection parameters:
  Position = (300.2, 324.0) = 9 17 54.11 51 43 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 788.9 +/- 34.9
  Background counts = 16.9
  Rate = 0.05 +/- 0.002

[Sun Jul 15 05:46:26 2012] Off-axis axis estimate = 1.86'
[Sun Jul 15 07:58:17 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 07:58:17 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Jul 15 07:58:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Sun Jul 15 07:58:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Sun Jul 15 09:33:48 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 09:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 09:33:48 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 09:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 09:33:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 09:33:49 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 11:13:19 2012] Spatial fit model total counts = 2977.700000, observed total counts = 2984.000000
[Sun Jul 15 11:13:19 2012] Offset between fit and detection position for source 2 = 0.852054 pixels
[Sun Jul 15 11:13:19 2012] 2948.583000 total counts/ 2282.850000 bgd. counts: snr = 13.933538
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.852054 pixels
  Position = (300.3, 324.8) = 9 17 54.04 51 43 51.9
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 665.7 +/- 54.3
  Background counts = 2282.8
  Rate = 0.05 +/- 0.004
[Sun Jul 15 11:13:19 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 11:13:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 11:13:19 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 11:13:19 2012] Source does appear to be extended
[Sun Jul 15 11:13:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 12:45:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 12:45:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 12:45:44 2012] Initial guess for spatial extent in simple fitting = 14.71"
[Sun Jul 15 12:45:44 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.062
[Sun Jul 15 12:45:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.71"
[Sun Jul 15 14:54:31 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 14:54:31 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 14:54:32 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 14:54:32 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 14:54:32 2012] Fit fullrun_mos1_xmm0084230601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 16:27:30 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sun Jul 15 16:27:30 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:27:30 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:27:30 2012] Source does appear to be extended
[Sun Jul 15 16:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:27:30 2012] Source is confused with source 7
[Sun Jul 15 19:35:21 2012] XMMSAS src. selection expression = ellipse(26080.335400, 28210.826600, 882.804025, 882.804025, 0.000000, X, Y)
[Sun Jul 15 19:35:21 2012] Writing source region out to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 15 19:35:21 2012] Extracting stamp from image fullrun_mos1_xmm0084230601_pi300-10000_cl_sm2.00.img.gz, (250, 274) - (351, 376)
[Sun Jul 15 19:35:21 2012] XMMSAS bgd. selection expression = annulus(26080.335400, 28210.826600, 1471.340042, 2942.680085, X, Y) && !ellipse(27694.145386, 27350.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27254.314000, 26647.618000, 2285.200066, 2285.200066, 0.000000, X, Y) && !ellipse(24887.674000, 28602.970000, 1011.664029, 1011.664029, 0.000000, X, Y) && !ellipse(27820.472000, 28129.360000, 2181.328063, 2181.328063, 0.000000, X, Y) && !ellipse(26242.594000, 25945.124000, 1082.752031, 1082.752031, 0.000000, X, Y) && !ellipse(28342.344000, 26964.792000, 2415.632070, 2415.632070, 0.000000, X, Y) && !ellipse(25431.001068, 26585.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.890000, 28952.108000, 2530.976073, 2530.976073, 0.000000, X, Y) && !ellipse(24306.590851, 27190.287201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.405701, 26766.977295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27995.822000, 25004.012000, 2338.368067, 2338.368067, 0.000000, X, Y) && !ellipse(23870.520000, 29300.944000, 2023.312058, 2022.696058, 246.373000, X, Y) && !ellipse(29125.538000, 28976.524000, 1276.080037, 1276.080037, 0.000000, X, Y) && !ellipse(23677.155090, 26605.052368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.036652, 25652.613708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28878.182000, 25977.050000, 1208.664035, 1208.664035, 0.000000, X, Y) && !ellipse(25039.788000, 30006.740000, 1265.488036, 1265.488036, 0.000000, X, Y) && !ellipse(26696.584000, 24441.458000, 1146.032033, 1146.032033, 0.000000, X, Y)
[Sun Jul 15 19:35:21 2012] Writing fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2.gif
[Sun Jul 15 19:35:24 2012] Mean detx,y = (545.65, -309.13) 
[Sun Jul 15 19:35:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 19:35:36 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 19:35:36 2012] Setting source spectrum file to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 19:35:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 15 22:26:31 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:26:31 2012] Error reading totcts from fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 22:26:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:26:32 2012] Using photon index=1.80, rate=0.045, arf fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 22:26:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:26:32 2012] Updating source flux to 4.3e-13
[Sun Jul 15 22:26:34 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Jul 15 22:27:59 2012] Reading fit data from xmm0084230601/analysis//spectral/fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jul 15 22:27:59 2012] Spectral fit parameter nH value = 5.37375e+20
[Sun Jul 15 22:27:59 2012] Spectral fit parameter PhoIndex value = 1.70185
[Sun Jul 15 22:27:59 2012] Failed to get F(0.3-8.0) from xmm0084230601/analysis//spectral/fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 22:27:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:27:59 2012] Using Nh = 5.4e+20, photon index=1.70, rate=0.045, arf fullrun_mos1_xmm0084230601_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 22:27:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:27:59 2012] Updating source flux to 4.7e-13