[Sun Jul 15 05:46:25 2012] Detection parameters:
  Position = (295.5, 302.0) = 9 17 56.33 51 42 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 13.9
  Background counts = 13.3
  Rate = 0.007 +/- 0.001

[Sun Jul 15 05:46:26 2012] Off-axis axis estimate = 0.34'
[Sun Jul 15 07:58:17 2012] Using EEF radius (= 6.60 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 07:58:17 2012] Initial guess for spatial extent in simple fitting = 6.60"
[Sun Jul 15 07:58:17 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.984
[Sun Jul 15 07:58:17 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.60"
[Sun Jul 15 09:33:48 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jul 15 09:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src11.csv
[Sun Jul 15 09:33:48 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jul 15 09:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src11.csv
[Sun Jul 15 09:33:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jul 15 09:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 15 09:33:49 2012] fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jul 15 09:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 15 09:33:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230601_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:13:19 2012] Warning, spatial fit 11 centroid is now closest to src. 15
[Sun Jul 15 11:13:19 2012] Spatial fit model total counts = 363.170000, observed total counts = 361.000000
[Sun Jul 15 11:13:19 2012] Offset between fit and detection position for source 17 = 0.993081 pixels
[Sun Jul 15 11:13:19 2012] Warning, changing simple spatial fit ID from 11 to 22
[Sun Jul 15 11:13:19 2012] 367.347200 total counts/ 354.881000 bgd. counts: snr = 0.661748
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.993081 pixels
  Position = (296.2, 301.3) = 9 17 55.99 51 42 9.6
  Extent = 2.5 (1.7-5.3)", rotation angle = 0
  Source counts = 12.5 +/- 19.2
  Background counts = 354.9
  Rate = 0.0008 +/- 0.001
  Deleting source due to low Poisson probability