[Fri Jul 27 05:30:44 2012] Detection parameters:
  Position = (280.9, 281.9) = 2 48 3.33 -3 31 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20943.0 +/- 173.2
  Background counts = 102.2
  Rate = 0.8 +/- 0.007

[Fri Jul 27 05:30:45 2012] Off-axis axis estimate = 1.75'
[Fri Jul 27 05:33:34 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:33:34 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jul 27 05:33:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Jul 27 05:33:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Jul 27 07:16:25 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 07:16:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 07:16:25 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 07:16:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 07:16:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 07:16:26 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 07:16:26 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 07:16:26 2012] Fit fullrun_pn_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 09:10:32 2012] Spatial fit model total counts = 37519.200000, observed total counts = 37324.000000
[Fri Jul 27 09:10:32 2012] Offset between fit and detection position for source 1 = 0.224861 pixels
[Fri Jul 27 09:10:32 2012] 37405.600000 total counts/ 16369.000000 bgd. counts: snr = 164.423722
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.224861 pixels
  Position = (280.8, 281.7) = 2 48 3.36 -3 31 43.6
  Extent = 11.4 (11.2-11.6)", rotation angle = 0
  Source counts = 21036.6 +/- 193.4
  Background counts = 16369.0
  Rate = 0.7 +/- 0.007
[Fri Jul 27 09:10:32 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 09:10:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 09:10:32 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 09:10:32 2012] Source does appear to be extended
[Fri Jul 27 09:10:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 09:10:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 09:10:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 09:10:55 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Fri Jul 27 09:10:55 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Fri Jul 27 09:10:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.42"
[Fri Jul 27 09:50:30 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 09:50:30 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 09:50:30 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 09:50:30 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 09:50:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 09:50:30 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 09:50:30 2012] fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 09:50:30 2012] Fit fullrun_pn_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 27 11:59:12 2012] Warning, spatial fit 1 centroid is now closest to src. 31
[Fri Jul 27 11:59:12 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:59:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:59:12 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 11:59:12 2012] Source does appear to be extended
[Fri Jul 27 11:59:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 11:59:46 2012] Counts = 21036.600000, rescaling region sizes by 3.000000
[Fri Jul 27 11:59:46 2012] XMMSAS src. selection expression = ellipse(24382.910540, 24460.336000, 2055.366059, 2055.366059, 0.000000, X, Y)
[Fri Jul 27 11:59:46 2012] Writing source region out to fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 11:59:46 2012] Extracting stamp from image fullrun_pn_xmm0084230501_pi300-10000_cl_sm2.00.img.gz, (163, 164) - (399, 400)
[Fri Jul 27 11:59:46 2012] XMMSAS bgd. selection expression = annulus(24382.910540, 24460.336000, 10276.830296, 20553.660591, X, Y) && !ellipse(19743.997345, 38602.030579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19701.033661, 35644.203156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15890.578094, 33338.971313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23681.017400, 28233.566800, 444.976813, 444.976813, 0.000000, X, Y) && !ellipse(23967.010000, 26238.672000, 1191.656034, 1191.656034, 0.000000, X, Y) && !ellipse(25880.866577, 26031.167786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37733.135071, 25952.820526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20902.568497, 25708.810059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19008.094910, 25192.136047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26791.010620, 24417.810028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13599.202200, 13114.788300, 425.795582, 425.795582, 0.000000, X, Y) && !ellipse(27410.628082, 24042.293304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.492249, 23220.649353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18859.887200, 21261.626200, 447.084813, 447.084813, 0.000000, X, Y) && !ellipse(22185.079200, 19828.621000, 420.582412, 420.582412, 0.000000, X, Y) && !ellipse(9578.034866, 19465.383881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16841.731720, 18989.136673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31816.227051, 18458.429504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29844.942139, 17876.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16603.384430, 17009.514969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35890.188965, 16765.993027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18382.295212, 14560.461517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20678.156128, 16131.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20007.624496, 38650.075989, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 11:59:46 2012] Writing fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 12:00:26 2012] Mean detx,y = (92.05, -244.64) 
[Fri Jul 27 12:00:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 12:18:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 12:18:42 2012] Setting source spectrum file to fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 12:18:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 18:25:06 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:25:06 2012] Error reading totcts from fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 18:25:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:25:08 2012] Using photon index=1.80, rate=0.712, arf fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 18:25:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:25:08 2012] Updating source flux to 1.6e-12
[Fri Jul 27 18:28:17 2012] Reading fit data from xmm0084230501/analysis//spectral/fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 27 18:28:17 2012] Spectral fit parameter nH value = 1.06853e+21
[Fri Jul 27 18:28:17 2012] Spectral fit parameter PhoIndex value = 2.18186
[Fri Jul 27 18:28:17 2012] Failed to get F(0.3-8.0) from xmm0084230501/analysis//spectral/fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 18:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:28:17 2012] Using Nh = 1.1e+21, photon index=2.18, rate=0.712, arf fullrun_pn_xmm0084230501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 18:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:28:17 2012] Updating source flux to 1.6e-12