[Fri Jul 27 05:31:42 2012] Detection parameters:
  Position = (279.3, 256.6) = 2 48 3.80 -3 33 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.8 +/- 12.4
  Background counts = 35.5
  Rate = 0.002 +/- 0.0004

[Fri Jul 27 05:31:43 2012] Off-axis axis estimate = 3.34'
[Fri Jul 27 08:08:16 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 08:08:16 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Jul 27 08:08:16 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.121
[Fri Jul 27 08:08:16 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.10"
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src27.csv
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src27.csv
[Fri Jul 27 09:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 09:10:22 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jul 27 09:10:22 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jul 27 09:10:22 2012] Fit fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Jul 27 09:10:44 2012] Source 23 is offset by 0.802859 and -5.670955 pixels which is larger than
2 X fitted extent = 1.106519 x 1.106519, not incorporating fit results
[Fri Jul 27 09:10:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 09:10:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 09:10:44 2012] Assessing source extent using major
[Fri Jul 27 09:10:44 2012] Source does appear to be extended
[Fri Jul 27 09:10:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 10:31:08 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:31:08 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Jul 27 10:31:08 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.121
[Fri Jul 27 10:31:08 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.10"
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jul 27 11:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src26.csv
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jul 27 11:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src26.csv
[Fri Jul 27 11:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:59:02 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jul 27 11:59:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jul 27 11:59:02 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jul 27 11:59:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jul 27 11:59:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:59:30 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.391326 pixels away
[Fri Jul 27 11:59:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:59:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:59:30 2012] Assessing source extent using major
[Fri Jul 27 11:59:30 2012] Source does appear to be extended
[Fri Jul 27 11:59:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:54:54 2012] XMMSAS src. selection expression = ellipse(24249.016541, 22274.704895, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 17:54:54 2012] Writing source region out to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src23_src.reg
[Fri Jul 27 17:54:54 2012] Extracting stamp from image fullrun_mos2_xmm0084230501_pi300-10000_cl_sm2.00.img.gz, (242, 219) - (317, 294)
[Fri Jul 27 17:54:54 2012] XMMSAS bgd. selection expression = annulus(24249.016541, 22274.704895, 1087.500000, 2175.000000, X, Y) && !ellipse(24393.341720, 24464.131200, 859.440025, 859.440025, 0.000000, X, Y) && !ellipse(23528.128296, 24671.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23378.894409, 23802.597260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.843400, 19842.118000, 357.100810, 357.100810, 0.000000, X, Y) && !ellipse(26803.011353, 24742.020966, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 17:54:54 2012] Writing fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src23.gif
[Fri Jul 27 18:07:43 2012] Mean detx,y = (368.01, 2207.80) 
[Fri Jul 27 18:07:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 18:07:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 18:07:53 2012] Setting source spectrum file to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 27 18:07:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jul 27 18:23:39 2012] Not generating rmf since there are only 52 counts
[Fri Jul 27 18:23:39 2012] rmf not generated due to insufficient counts
[Fri Jul 27 18:25:13 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:25:13 2012] Error reading totcts from fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 27 18:25:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:25:14 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src23.arf
[Fri Jul 27 18:25:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:25:14 2012] Updating source flux to 1.8e-14
[Fri Jul 27 18:25:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting