[Fri Jul 27 05:31:42 2012] Detection parameters:
  Position = (289.3, 296.7) = 2 48 0.89 -3 30 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.3 +/- 20.0
  Background counts = 36.5
  Rate = 0.005 +/- 0.0006

[Fri Jul 27 05:31:43 2012] Off-axis axis estimate = 0.67'
[Fri Jul 27 08:08:16 2012] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 08:08:16 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Fri Jul 27 08:08:16 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Fri Jul 27 08:08:16 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.77"
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 09:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jul 27 09:10:21 2012] Fit fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jul 27 09:10:44 2012] Warning, spatial fit 7 centroid is now closest to src. 14
[Fri Jul 27 09:10:44 2012] Spatial fit model total counts = 661.584000, observed total counts = 663.000000
[Fri Jul 27 09:10:44 2012] Offset between fit and detection position for source 15 = 3.197517 pixels
[Fri Jul 27 09:10:44 2012] Warning, changing simple spatial fit ID from 7 to 13
[Fri Jul 27 09:10:44 2012] 619.447400 total counts/ 563.132000 bgd. counts: snr = 2.373133
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.197517 pixels
  Position = (292.0, 295.1) = 2 48 0.10 -3 30 45.3
  Extent = 9.1 (5.3-13.0)", rotation angle = 0
  Source counts = 56.3 +/- 24.9
  Background counts = 563.1
  Rate = 0.002 +/- 0.0007
[Fri Jul 27 09:10:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 09:10:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 09:10:44 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 09:10:44 2012] Source does appear to be extended
[Fri Jul 27 09:10:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 10:31:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:31:08 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Fri Jul 27 10:31:08 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.330
[Fri Jul 27 10:31:08 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.14"
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jul 27 11:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src7.csv
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jul 27 11:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src7.csv
[Fri Jul 27 11:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 27 11:59:01 2012] Fit fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jul 27 11:59:30 2012] Warning, spatial fit 7 centroid is now closest to src. 20
[Fri Jul 27 11:59:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:59:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:59:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 11:59:30 2012] Source does appear to be extended
[Fri Jul 27 11:59:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:54:53 2012] XMMSAS src. selection expression = ellipse(25359.286000, 25624.510000, 548.436016, 548.436016, 0.000000, X, Y)
[Fri Jul 27 17:54:53 2012] Writing source region out to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src15_src.reg
[Fri Jul 27 17:54:53 2012] Extracting stamp from image fullrun_mos2_xmm0084230501_pi300-10000_cl_sm2.00.img.gz, (261, 264) - (324, 327)
[Fri Jul 27 17:54:53 2012] XMMSAS bgd. selection expression = annulus(25359.286000, 25624.510000, 914.060026, 1828.120053, X, Y) && !ellipse(24393.341720, 24464.131200, 859.440025, 859.440025, 0.000000, X, Y) && !ellipse(23528.128296, 24671.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23378.894409, 23802.597260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25634.978000, 26418.732000, 1082.464031, 1082.464031, 0.000000, X, Y) && !ellipse(26373.401062, 25339.630890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26803.011353, 24742.020966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23669.567017, 26467.936035, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 17:54:53 2012] Writing fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src15.gif
[Fri Jul 27 18:02:07 2012] Mean detx,y = (672.11, -1095.41) 
[Fri Jul 27 18:02:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 18:02:18 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 18:02:19 2012] Setting source spectrum file to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jul 27 18:02:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jul 27 18:17:43 2012] Not generating rmf since there are only 56 counts
[Fri Jul 27 18:17:43 2012] rmf not generated due to insufficient counts
[Fri Jul 27 18:25:12 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:25:12 2012] Error reading totcts from fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jul 27 18:25:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:25:13 2012] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src15.arf
[Fri Jul 27 18:25:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:25:14 2012] Updating source flux to 1.8e-14
[Fri Jul 27 18:25:57 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting