[Fri Jul 27 05:31:42 2012] Detection parameters:
  Position = (280.9, 281.9) = 2 48 3.33 -3 31 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8035.0 +/- 107.3
  Background counts = 43.8
  Rate = 0.2 +/- 0.003

[Fri Jul 27 05:31:43 2012] Off-axis axis estimate = 1.75'
[Fri Jul 27 08:08:16 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 08:08:16 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jul 27 08:08:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Jul 27 08:08:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 09:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 09:10:21 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 09:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 09:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 09:10:44 2012] Warning, spatial fit 1 centroid is now closest to src. 20
[Fri Jul 27 09:10:44 2012] Source 1 is offset by 0.335713 and 6.486003 pixels which is larger than
2 X fitted extent = 1.196336 x 1.196336, not incorporating fit results
[Fri Jul 27 09:10:44 2012] Spatial fit model total counts = 2730.020000, observed total counts = 2174.000000
[Fri Jul 27 09:10:44 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 09:10:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 09:10:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 09:10:44 2012] Assessing source extent using major
[Fri Jul 27 09:10:44 2012] Source does appear to be extended
[Fri Jul 27 09:10:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 10:31:08 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:31:08 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jul 27 10:31:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Jul 27 10:31:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 11:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 11:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 11:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 11:59:01 2012] fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 11:59:01 2012] Fit fullrun_mos2_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 27 11:59:30 2012] Spatial fit model total counts = 14767.100000, observed total counts = 13934.000000
[Fri Jul 27 11:59:30 2012] Offset between fit and detection position for source 1 = 0.164548 pixels
[Fri Jul 27 11:59:30 2012] 14667.450000 total counts/ 7153.750000 bgd. counts: snr = 88.835586
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.164548 pixels
  Position = (280.9, 281.8) = 2 48 3.32 -3 31 43.4
  Extent = 10.7 (10.5-10.9)", rotation angle = 0
  Source counts = 7513.7 +/- 121.1
  Background counts = 7153.8
  Rate = 0.2 +/- 0.004
[Fri Jul 27 11:59:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:59:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:59:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 11:59:30 2012] Source does appear to be extended
[Fri Jul 27 11:59:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:54:53 2012] Counts = 7513.700000, rescaling region sizes by 2.000000
[Fri Jul 27 17:54:53 2012] XMMSAS src. selection expression = ellipse(24393.341720, 24464.131200, 1289.160037, 1289.160037, 0.000000, X, Y)
[Fri Jul 27 17:54:53 2012] Writing source region out to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 17:54:53 2012] Extracting stamp from image fullrun_mos2_xmm0084230501_pi300-10000_cl_sm2.00.img.gz, (207, 208) - (355, 356)
[Fri Jul 27 17:54:53 2012] XMMSAS bgd. selection expression = annulus(24393.341720, 24464.131200, 4297.200124, 8594.400247, X, Y) && !ellipse(23528.128296, 24671.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31827.479065, 18414.232559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23378.894409, 23802.597260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.843400, 19842.118000, 357.100810, 357.100810, 0.000000, X, Y) && !ellipse(25359.286000, 25624.510000, 731.248021, 731.248021, 0.000000, X, Y) && !ellipse(18845.899560, 21256.855200, 328.296009, 328.296009, 0.000000, X, Y) && !ellipse(23665.067600, 28237.249800, 391.329611, 391.329611, 0.000000, X, Y) && !ellipse(25634.978000, 26418.732000, 1082.464031, 1082.464031, 0.000000, X, Y) && !ellipse(20415.934814, 20851.793716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20644.824890, 16152.852509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26373.401062, 25339.630890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29861.804230, 17879.509659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22238.219482, 17889.601425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15920.116623, 33214.203522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18123.676400, 32894.390000, 964.304028, 404.404812, 50.405835, X, Y) && !ellipse(24249.016541, 22274.704895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26803.011353, 24742.020966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23669.567017, 26467.936035, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 17:54:53 2012] Writing fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 17:55:00 2012] Mean detx,y = (84.55, 158.06) 
[Fri Jul 27 17:55:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 17:58:29 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 17:58:29 2012] Setting source spectrum file to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 17:58:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 18:25:12 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:25:12 2012] Error reading totcts from fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 18:25:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:25:13 2012] Using photon index=1.80, rate=0.225, arf fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 18:25:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:25:13 2012] Updating source flux to 2.1e-12
[Fri Jul 27 18:25:57 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri Jul 27 18:25:57 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Jul 27 18:27:18 2012] Reading fit data from xmm0084230501/analysis//spectral/fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 27 18:27:18 2012] Spectral fit parameter nH value = 1.09385e+21
[Fri Jul 27 18:27:18 2012] Spectral fit parameter PhoIndex value = 2.18274
[Fri Jul 27 18:27:18 2012] Failed to get F(0.3-8.0) from xmm0084230501/analysis//spectral/fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 18:27:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:27:18 2012] Using Nh = 1.1e+21, photon index=2.18, rate=0.225, arf fullrun_mos2_xmm0084230501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 18:27:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:27:18 2012] Updating source flux to 2e-12