[Fri Jul 27 05:31:13 2012] Detection parameters:
  Position = (272.8, 262.5) = 2 48 5.68 -3 33 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.9 +/- 14.8
  Background counts = 34.2
  Rate = 0.003 +/- 0.0005

[Fri Jul 27 05:31:13 2012] Off-axis axis estimate = 3.20'
[Fri Jul 27 07:16:27 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 07:16:27 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Fri Jul 27 07:16:27 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.136
[Fri Jul 27 07:16:27 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.03"
[Fri Jul 27 08:08:15 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 27 08:08:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src13.csv
[Fri Jul 27 08:08:15 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 27 08:08:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src13.csv
[Fri Jul 27 08:08:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 08:08:16 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 27 08:08:16 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 27 08:08:16 2012] Fit fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul 27 09:10:38 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.187338 pixels away
[Fri Jul 27 09:10:38 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 09:10:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 09:10:38 2012] Assessing source extent using major
[Fri Jul 27 09:10:38 2012] Source does appear to be extended
[Fri Jul 27 09:10:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 09:50:31 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 09:50:31 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Fri Jul 27 09:50:31 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.136
[Fri Jul 27 09:50:31 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.03"
[Fri Jul 27 10:31:07 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul 27 10:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src11.csv
[Fri Jul 27 10:31:07 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul 27 10:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src11.csv
[Fri Jul 27 10:31:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 10:31:08 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul 27 10:31:08 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul 27 10:31:08 2012] Fit fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jul 27 11:59:19 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.238089 pixels away
[Fri Jul 27 11:59:19 2012] Source 31 is offset by -1.868198 and -6.753597 pixels which is larger than
2 X fitted extent = 0.911389 x 0.911389, not incorporating fit results
[Fri Jul 27 11:59:20 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:59:20 2012] Assessing source extent using major
[Fri Jul 27 11:59:20 2012] Source does appear to be extended
[Fri Jul 27 11:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 11:59:20 2012] Source is confused with source 30
[Fri Jul 27 16:32:44 2012] XMMSAS src. selection expression = ellipse(23688.640747, 22792.263031, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 16:32:44 2012] Writing source region out to fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src31_src.reg
[Fri Jul 27 16:32:44 2012] Extracting stamp from image fullrun_mos1_xmm0084230501_pi300-10000_cl_sm2.00.img.gz, (235, 225) - (310, 300)
[Fri Jul 27 16:32:44 2012] XMMSAS bgd. selection expression = annulus(23688.640747, 22792.263031, 1087.500000, 2175.000000, X, Y) && !ellipse(24374.008900, 24458.066400, 3201.408092, 3201.408092, 0.000000, X, Y) && !ellipse(22188.055359, 19816.827454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.008000, 23203.628000, 1264.256036, 1264.256036, 0.000000, X, Y) && !ellipse(24890.153015, 22532.179016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20857.528580, 25705.862976, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 16:32:44 2012] Writing fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src31.gif
[Fri Jul 27 16:52:19 2012] Mean detx,y = (2014.46, 81.76) 
[Fri Jul 27 16:52:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 16:52:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 16:52:39 2012] Setting source spectrum file to fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jul 27 16:52:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Jul 27 17:45:43 2012] Not generating rmf since there are only 90 counts
[Fri Jul 27 17:45:43 2012] rmf not generated due to insufficient counts
[Fri Jul 27 18:25:10 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:25:10 2012] Error reading totcts from fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jul 27 18:25:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:25:11 2012] Using photon index=1.80, rate=0.00304, arf fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src31.arf
[Fri Jul 27 18:25:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:25:11 2012] Updating source flux to 3.2e-14
[Fri Jul 27 18:25:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting