[Fri Jul 27 05:31:12 2012] Detection parameters:
  Position = (281.6, 260.6) = 2 48 3.14 -3 33 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.8 +/- 13.5
  Background counts = 33.1
  Rate = 0.003 +/- 0.0004

[Fri Jul 27 05:31:13 2012] Off-axis axis estimate = 3.00'
[Fri Jul 27 07:16:27 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 07:16:27 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Fri Jul 27 07:16:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.158
[Fri Jul 27 07:16:27 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.93"
[Fri Jul 27 08:08:15 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jul 27 08:08:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src15.csv
[Fri Jul 27 08:08:15 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jul 27 08:08:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src15.csv
[Fri Jul 27 08:08:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 08:08:16 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 27 08:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 27 08:08:16 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 27 08:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jul 27 08:08:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 09:10:38 2012] Spatial fit model total counts = 188.729000, observed total counts = 1150.000000
[Fri Jul 27 09:10:38 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 09:10:38 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 09:10:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 09:10:38 2012] Assessing source extent using major
[Fri Jul 27 09:10:38 2012] Source does appear to be extended
[Fri Jul 27 09:10:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 09:10:38 2012] Source is confused with source 29
[Fri Jul 27 09:50:31 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 09:50:31 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Fri Jul 27 09:50:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.158
[Fri Jul 27 09:50:31 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.93"
[Fri Jul 27 10:31:07 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul 27 10:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src13.csv
[Fri Jul 27 10:31:07 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul 27 10:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src13.csv
[Fri Jul 27 10:31:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 10:31:08 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul 27 10:31:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 27 10:31:08 2012] fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul 27 10:31:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 27 10:31:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230501_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:59:19 2012] Warning, spatial fit 13 centroid is now closest to src. 31
[Fri Jul 27 11:59:19 2012] Spatial fit model total counts = 830.828000, observed total counts = 812.000000
[Fri Jul 27 11:59:19 2012] Offset between fit and detection position for source 30 = 6.635161 pixels
[Fri Jul 27 11:59:19 2012] Warning, changing simple spatial fit ID from 13 to 14
[Fri Jul 27 11:59:19 2012] 843.328000 total counts/ 707.483000 bgd. counts: snr = 5.107233
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 6.635161 pixels
  Position = (282.0, 267.3) = 2 48 3.02 -3 32 46.4
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 135.8 +/- 29.0
  Background counts = 707.5
  Rate = 0.004 +/- 0.0009
[Fri Jul 27 11:59:20 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:59:20 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 11:59:20 2012] Source does appear to be extended
[Fri Jul 27 11:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 16:32:44 2012] XMMSAS src. selection expression = ellipse(24483.008000, 23203.628000, 948.192027, 948.192027, 0.000000, X, Y)
[Fri Jul 27 16:32:44 2012] Writing source region out to fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src30_src.reg
[Fri Jul 27 16:32:44 2012] Extracting stamp from image fullrun_mos1_xmm0084230501_pi300-10000_cl_sm2.00.img.gz, (227, 213) - (336, 322)
[Fri Jul 27 16:32:44 2012] XMMSAS bgd. selection expression = annulus(24483.008000, 23203.628000, 1580.320045, 3160.640091, X, Y) && !ellipse(24374.008900, 24458.066400, 3201.408092, 3201.408092, 0.000000, X, Y) && !ellipse(22188.055359, 19816.827454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27447.833320, 24024.224400, 336.996810, 336.996810, 0.000000, X, Y) && !ellipse(23688.640747, 22792.263031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24890.153015, 22532.179016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.618073, 26292.958984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20857.528580, 25705.862976, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 16:32:44 2012] Writing fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src30.gif
[Fri Jul 27 16:53:24 2012] Mean detx,y = (1176.44, -460.34) 
[Fri Jul 27 16:53:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 16:53:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 16:53:50 2012] Setting source spectrum file to fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jul 27 16:53:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jul 27 18:25:10 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:25:10 2012] Error reading totcts from fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jul 27 18:25:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:25:11 2012] Using photon index=1.80, rate=0.00408, arf fullrun_mos1_xmm0084230501_pi300-10000_pass1_cl_src30.arf
[Fri Jul 27 18:25:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:25:11 2012] Updating source flux to 4e-14
[Fri Jul 27 18:25:16 2012] Flag p found in src. 30 procflags, skipping spectral fitting
[Fri Jul 27 18:25:16 2012] Flag c found in src. 30 procflags, skipping spectral fitting