[Tue Jun 18 19:30:05 2013] Detection parameters:
  Position = (298.6, 316.8) = 1 52 47.26 1 1 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.8 +/- 23.7
  Background counts = 230.0
  Rate = 0.005 +/- 0.001

[Tue Jun 18 19:30:05 2013] Off-axis axis estimate = 1.33'
[Tue Jun 18 19:32:45 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 19:32:45 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Jun 18 19:32:45 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.101
[Tue Jun 18 19:32:45 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 7.09"
[Tue Jun 18 20:21:07 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jun 18 20:21:07 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jun 18 20:21:07 2013] Fit fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src19 appears to have run properly
[Tue Jun 18 20:21:08 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jun 18 20:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jun 18 20:21:08 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jun 18 20:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jun 18 20:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:03:54 2013] Source 19 is offset by 7.122520 and -3.473445 pixels which is larger than
2 X fitted extent = 6.079356 x 1.403959, not incorporating fit results
[Tue Jun 18 22:03:54 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 22:03:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 22:03:54 2013] Assessing source extent using major
[Tue Jun 18 22:03:54 2013] Source does appear to be extended
[Tue Jun 18 22:03:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 22:04:12 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 22:04:12 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Jun 18 22:04:12 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.101
[Tue Jun 18 22:04:12 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 7.09"
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src19.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src19.csv
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src19.csv
[Tue Jun 18 22:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue Jun 18 22:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:24:53 2013] Source 19 is offset by 7.122520 and -5.168502 pixels which is larger than
2 X fitted extent = 6.308230 x 6.308230, not incorporating fit results
[Wed Jun 19 00:24:53 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 00:24:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 00:24:53 2013] Assessing source extent using major
[Wed Jun 19 00:24:53 2013] Source does appear to be extended
[Wed Jun 19 00:24:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 00:24:53 2013] Source is confused with source 1
[Wed Jun 19 00:25:09 2013] XMMSAS src. selection expression = ellipse(25929.695221, 27510.810303, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 00:25:09 2013] Writing source region out to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19_src.reg
[Wed Jun 19 00:25:09 2013] Extracting stamp from image fullrun_pn_xmm0084230401_pi300-10000_cl_sm2.00.img.gz, (261, 279) - (336, 354)
[Wed Jun 19 00:25:09 2013] XMMSAS bgd. selection expression = annulus(25929.695221, 27510.810303, 1087.500000, 2175.000000, X, Y) && !ellipse(27411.248000, 27025.786000, 2435.792070, 1963.240056, 227.944000, X, Y) && !ellipse(27320.476562, 28510.771332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23697.118256, 28883.338318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27949.909668, 28729.529816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.957825, 28677.270874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.125916, 28272.413422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25949.183136, 26106.111298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.726000, 26518.426000, 1217.896035, 1217.896035, 0.000000, X, Y) && !ellipse(26741.465118, 25536.942047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26267.282000, 25392.068000, 1533.040044, 468.591213, 155.303000, X, Y) && !ellipse(27807.220000, 24970.046000, 937.528027, 937.528027, 0.000000, X, Y)
[Wed Jun 19 00:25:09 2013] Writing fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19.gif
[Wed Jun 19 00:41:34 2013] Mean detx,y = (-1461.43, -35.99) 
[Wed Jun 19 00:41:36 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 00:41:57 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 00:41:57 2013] Setting source spectrum file to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jun 19 00:41:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Jun 19 01:03:18 2013] Not generating rmf since there are only 98 counts
[Wed Jun 19 01:03:18 2013] rmf not generated due to insufficient counts
[Wed Jun 19 02:12:57 2013] Updating aperture counts using extracted products
[Wed Jun 19 02:12:57 2013] Total counts from fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 736.00
[Wed Jun 19 02:12:57 2013] Total counts from fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19_bgd.pi.gz = 585.00
[Wed Jun 19 02:12:57 2013] Got source and background scale factors 1185378.000000, 3207850.000000
[Wed Jun 19 02:12:57 2013] User source parameters:
  Position = (298.6, 316.8) = 1 52 47.26 1 1 2.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 519.8 +/- 28.1
  Background aperture counts = 216.2
  Rate = 0.04 +/- 0.002

[Wed Jun 19 02:12:57 2013] Updating counts from extracted products
[Wed Jun 19 02:12:57 2013] Set source signif. to 519.83/14.70 = 35.36
[Wed Jun 19 02:12:59 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 02:12:59 2013] Using photon index=1.80, rate=0.0389, arf fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19.arf
[Wed Jun 19 02:12:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 02:12:59 2013] Updating source flux to 1.3e-13
[Wed Jun 19 02:13:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 02:13:31 2013] xmm0084230401/analysis//spectral/fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete