[Tue Jun 18 19:30:05 2013] Detection parameters:
  Position = (309.9, 330.2) = 1 52 43.99 1 1 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.5 +/- 20.9
  Background counts = 213.6
  Rate = 0.009 +/- 0.001

[Tue Jun 18 19:30:05 2013] Off-axis axis estimate = 2.45'
[Tue Jun 18 19:32:45 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 19:32:45 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Tue Jun 18 19:32:45 2013] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.637
[Tue Jun 18 19:32:45 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.65"
[Tue Jun 18 20:21:07 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jun 18 20:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src17.csv
[Tue Jun 18 20:21:07 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jun 18 20:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src17.csv
[Tue Jun 18 20:21:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:21:08 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jun 18 20:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Jun 18 20:21:08 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jun 18 20:21:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Jun 18 20:21:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:03:54 2013] Source 17 is offset by 4.543446 and -7.568128 pixels which is larger than
2 X fitted extent = 7.036230 x 7.036230, not incorporating fit results
[Tue Jun 18 22:03:54 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 22:03:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 22:03:54 2013] Assessing source extent using major
[Tue Jun 18 22:03:54 2013] Source does appear to be extended
[Tue Jun 18 22:03:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 22:03:54 2013] Source is confused with source 8
[Tue Jun 18 22:04:12 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 22:04:12 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Tue Jun 18 22:04:12 2013] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.637
[Tue Jun 18 22:04:12 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.65"
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src17.csv
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src17.csv
[Tue Jun 18 22:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jun 18 22:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:24:53 2013] Source 17 is offset by 2.932366 and 8.223320 pixels which is larger than
2 X fitted extent = 0.880257 x 0.880257, not incorporating fit results
[Wed Jun 19 00:24:53 2013] Source 17 is offset by 1.198177 and 4.077136 pixels which is larger than
2 X fitted extent = 0.959264 x 1.106998, not incorporating fit results
[Wed Jun 19 00:24:53 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 00:24:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 00:24:53 2013] Assessing source extent using major
[Wed Jun 19 00:24:53 2013] Source does appear to be extended
[Wed Jun 19 00:24:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 00:25:09 2013] XMMSAS src. selection expression = ellipse(26911.957825, 28677.270874, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 00:25:09 2013] Writing source region out to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 19 00:25:09 2013] Extracting stamp from image fullrun_pn_xmm0084230401_pi300-10000_cl_sm2.00.img.gz, (272, 293) - (347, 368)
[Wed Jun 19 00:25:09 2013] XMMSAS bgd. selection expression = annulus(26911.957825, 28677.270874, 1087.500000, 2175.000000, X, Y) && !ellipse(27411.248000, 27025.786000, 2435.792070, 1963.240056, 227.944000, X, Y) && !ellipse(27320.476562, 28510.771332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27949.909668, 28729.529816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.125916, 28272.413422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25929.695221, 27510.810303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25949.183136, 26106.111298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.726000, 26518.426000, 1217.896035, 1217.896035, 0.000000, X, Y) && !ellipse(26267.282000, 25392.068000, 1533.040044, 468.591213, 155.303000, X, Y)
[Wed Jun 19 00:25:09 2013] Writing fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17.gif
[Wed Jun 19 00:40:31 2013] Mean detx,y = (-1079.72, -1439.31) 
[Wed Jun 19 00:40:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 00:40:58 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 00:40:58 2013] Setting source spectrum file to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 19 00:40:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 19 01:02:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 01:02:28 2013] rmf not generated due to insufficient counts
[Wed Jun 19 02:12:57 2013] Updating aperture counts using extracted products
[Wed Jun 19 02:12:57 2013] Total counts from fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 594.00
[Wed Jun 19 02:12:57 2013] Total counts from fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17_bgd.pi.gz = 607.00
[Wed Jun 19 02:12:57 2013] Got source and background scale factors 1078470.000000, 3701825.000000
[Wed Jun 19 02:12:57 2013] User source parameters:
  Position = (309.9, 330.2) = 1 52 43.99 1 1 53.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 417.2 +/- 25.4
  Background aperture counts = 176.8
  Rate = 0.03 +/- 0.002

[Wed Jun 19 02:12:57 2013] Updating counts from extracted products
[Wed Jun 19 02:12:57 2013] Set source signif. to 417.16/13.30 = 31.37
[Wed Jun 19 02:12:59 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 02:12:59 2013] Using photon index=1.80, rate=0.0312, arf fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17.arf
[Wed Jun 19 02:12:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 02:12:59 2013] Updating source flux to 1.2e-13
[Wed Jun 19 02:13:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 02:13:31 2013] xmm0084230401/analysis//spectral/fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete