[Tue Jun 18 19:30:05 2013] Detection parameters:
  Position = (342.6, 373.3) = 1 52 34.51 1 5 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.3 +/- 23.2
  Background counts = 176.6
  Rate = 0.01 +/- 0.002

[Tue Jun 18 19:30:05 2013] Off-axis axis estimate = 6.30'
[Tue Jun 18 19:32:45 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 19:32:45 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Tue Jun 18 19:32:45 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Tue Jun 18 19:32:45 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.58"
[Tue Jun 18 20:21:07 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jun 18 20:21:07 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jun 18 20:21:07 2013] Fit fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_src13 appears to have run properly
[Tue Jun 18 20:21:08 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jun 18 20:21:08 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jun 18 20:21:08 2013] Fit fullrun_pn_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jun 18 22:03:54 2013] Spatial fit model total counts = 271.790000, observed total counts = 256.000000
[Tue Jun 18 22:03:54 2013] Offset between fit and detection position for source 13 = 0.223417 pixels
[Tue Jun 18 22:03:54 2013] 269.678900 total counts/ 181.370000 bgd. counts: snr = 6.557250
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.223417 pixels
  Position = (342.4, 373.4) = 1 52 34.57 1 5 8.1
  Extent = 5.4 (4.4-6.5)", rotation angle = 0
  Source counts = 88.3 +/- 16.4
  Background counts = 181.4
  Rate = 0.007 +/- 0.001
[Tue Jun 18 22:03:54 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 22:03:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 22:03:54 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 22:03:54 2013] Source does appear to be extended
[Tue Jun 18 22:03:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 22:04:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 22:04:12 2013] Initial guess for spatial extent in simple fitting = 5.40"
[Tue Jun 18 22:04:12 2013] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.743
[Tue Jun 18 22:04:12 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 5.40"
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src13.csv
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src13.csv
[Tue Jun 18 22:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jun 18 22:56:16 2013] fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jun 18 22:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jun 18 22:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:24:53 2013] Warning, spatial fit 13 centroid is now closest to src. 16
[Wed Jun 19 00:24:53 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 00:24:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 00:24:53 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 00:24:53 2013] Source does appear to be extended
[Wed Jun 19 00:24:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 00:25:09 2013] XMMSAS src. selection expression = ellipse(29736.997400, 32439.591600, 323.809209, 323.809209, 0.000000, X, Y)
[Wed Jun 19 00:25:09 2013] Writing source region out to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13_src.reg
[Wed Jun 19 00:25:09 2013] Extracting stamp from image fullrun_pn_xmm0084230401_pi300-10000_cl_sm2.00.img.gz, (324, 355) - (361, 392)
[Wed Jun 19 00:25:09 2013] XMMSAS bgd. selection expression = annulus(29736.997400, 32439.591600, 539.682016, 1079.364031, X, Y)
[Wed Jun 19 00:25:09 2013] Writing fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13.gif
[Wed Jun 19 00:39:01 2013] Mean detx,y = (90.86, -6000.33) 
[Wed Jun 19 00:39:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 00:39:11 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 00:39:11 2013] Setting source spectrum file to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun 19 00:39:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jun 19 01:01:51 2013] Not generating rmf since there are only 88 counts
[Wed Jun 19 01:01:51 2013] rmf not generated due to insufficient counts
[Wed Jun 19 02:12:56 2013] Updating aperture counts using extracted products
[Wed Jun 19 02:12:56 2013] Total counts from fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 121.00
[Wed Jun 19 02:12:56 2013] Total counts from fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 244.00
[Wed Jun 19 02:12:56 2013] Got source and background scale factors 328000.000000, 2331363.000000
[Wed Jun 19 02:12:56 2013] User source parameters:
  Position = (342.4, 373.4) = 1 52 34.57 1 5 8.1
  Extent = 5.4 (4.4-6.5)", rotation angle = 0
  Source aperture counts = 86.7 +/- 12.0
  Background aperture counts = 34.3
  Rate = 0.006 +/- 0.0009

[Wed Jun 19 02:12:59 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 02:12:59 2013] Using photon index=1.80, rate=0.00661, arf fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13.arf
[Wed Jun 19 02:12:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 02:12:59 2013] Updating source flux to 3e-14
[Wed Jun 19 02:13:26 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 02:13:31 2013] xmm0084230401/analysis//spectral/fullrun_pn_xmm0084230401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete