[Tue Jun 18 19:30:49 2013] Detection parameters:
  Position = (316.0, 310.0) = 1 52 42.21 1 0 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1447.3 +/- 48.7
  Background counts = 62.8
  Rate = 0.06 +/- 0.002

[Tue Jun 18 19:30:50 2013] Off-axis axis estimate = 1.53'
[Tue Jun 18 21:18:20 2013] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 21:18:20 2013] Initial guess for spatial extent in simple fitting = 7.19"
[Tue Jun 18 21:18:20 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Tue Jun 18 21:18:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Tue Jun 18 22:03:49 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 18 22:03:49 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 18 22:03:49 2013] Fit fullrun_mos2_xmm0084230401_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jun 18 22:03:49 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 18 22:03:49 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 18 22:03:49 2013] Fit fullrun_mos2_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 18 22:04:03 2013] Spatial fit model total counts = 4115.830000, observed total counts = 4014.000000
[Tue Jun 18 22:04:03 2013] Offset between fit and detection position for source 1 = 1.275143 pixels
[Tue Jun 18 22:04:03 2013] 4184.330000 total counts/ 3131.950000 bgd. counts: snr = 18.804647
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.275143 pixels
  Position = (315.9, 311.3) = 1 52 42.25 1 0 37.9
  Extent = 14.4 (14.4-28.8)" x 12.5 (10.7-14.0)", rotation angle = 73 (50-94) degrees
  Source counts = 1052.4 +/- 64.7
  Background counts = 3131.9
  Rate = 0.05 +/- 0.003
[Tue Jun 18 22:04:03 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 22:04:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 22:04:03 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 22:04:03 2013] Source does appear to be extended
[Tue Jun 18 22:04:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Tue Jun 18 23:45:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 23:45:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 23:45:16 2013] Initial guess for spatial extent in simple fitting = 13.44"
[Tue Jun 18 23:45:16 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951
[Tue Jun 18 23:45:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.44"
[Wed Jun 19 00:24:47 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 19 00:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_src1.csv
[Wed Jun 19 00:24:47 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 19 00:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_src1.csv
[Wed Jun 19 00:24:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:24:47 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 19 00:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 19 00:24:47 2013] fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 19 00:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 19 00:24:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:25:00 2013] Warning, spatial fit 1 centroid is now closest to src. 7
[Wed Jun 19 00:25:00 2013] Spatial fit model total counts = 2340.240000, observed total counts = 2036.000000
[Wed Jun 19 00:25:00 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 00:25:00 2013] Spatial fit model total counts = 2568.670000, observed total counts = 2251.000000
[Wed Jun 19 00:25:00 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 00:25:00 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 00:25:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 00:25:00 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 00:25:00 2013] Source does appear to be extended
[Wed Jun 19 00:25:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Wed Jun 19 01:41:18 2013] Counts = 1052.380000, rescaling region sizes by 2.000000
[Wed Jun 19 01:41:18 2013] XMMSAS src. selection expression = ellipse(27433.229380, 27035.773400, 1726.068050, 1499.448043, 73.237100, X, Y)
[Wed Jun 19 01:41:18 2013] Writing source region out to fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 19 01:41:18 2013] Extracting stamp from image fullrun_mos2_xmm0084230401_pi300-10000_cl_sm2.00.img.gz, (217, 212) - (415, 411)
[Wed Jun 19 01:41:18 2013] XMMSAS bgd. selection expression = annulus(27433.229380, 27035.773400, 5753.560166, 11507.120331, X, Y) && !ellipse(17513.708480, 29063.582600, 863.320025, 863.320025, 0.000000, X, Y) && !ellipse(28238.652069, 26294.859985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23907.305400, 31761.600000, 353.088593, 353.088593, 0.000000, X, Y) && !ellipse(27970.174000, 25924.428000, 1105.304032, 1105.304032, 0.000000, X, Y) && !ellipse(28367.293549, 26720.081512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35496.924600, 32535.069600, 722.105621, 225.674406, 38.346823, X, Y) && !ellipse(39292.901062, 31960.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30955.703800, 22702.832200, 580.932817, 368.390411, 71.226344, X, Y) && !ellipse(19893.273360, 33337.290800, 457.370413, 253.856807, 322.477411, X, Y) && !ellipse(25199.793980, 32664.995000, 503.387214, 309.316009, 354.842300, X, Y) && !ellipse(27759.992767, 25095.044281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.878906, 25453.359070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22474.195831, 32366.505768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28506.472839, 24778.105469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25953.247986, 26151.756561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.906000, 25104.726000, 1066.056031, 1066.056031, 0.000000, X, Y) && !ellipse(25872.750153, 26777.111542, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 01:41:18 2013] Writing fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1.gif
[Wed Jun 19 01:41:24 2013] Mean detx,y = (183.04, -41.03) 
[Wed Jun 19 01:41:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 01:47:04 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 01:47:05 2013] Setting source spectrum file to fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 19 01:47:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 19 02:13:06 2013] Updating aperture counts using extracted products
[Wed Jun 19 02:13:06 2013] Total counts from fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 8262.00
[Wed Jun 19 02:13:06 2013] Total counts from fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 18029.00
[Wed Jun 19 02:13:06 2013] Got source and background scale factors 7628540.000000, 283107336.000000
[Wed Jun 19 02:13:06 2013] User source parameters:
  Position = (315.9, 311.3) = 1 52 42.25 1 0 37.9
  Extent = 14.4 (14.4-28.8)" x 12.5 (10.7-14.0)", rotation angle = 73 (50-94) degrees
  Source aperture counts = 7776.2 +/- 91.9
  Background aperture counts = 485.8
  Rate = 0.4 +/- 0.005

[Wed Jun 19 02:13:13 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 02:13:13 2013] Using photon index=1.80, rate=0.0522, arf fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1.arf
[Wed Jun 19 02:13:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 02:13:13 2013] Updating source flux to 5.1e-13
[Wed Jun 19 02:13:20 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jun 19 02:13:26 2013] xmm0084230401/analysis//spectral/fullrun_mos2_xmm0084230401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete