[Tue Jun 18 19:30:28 2013] Detection parameters: Position = (320.2, 328.9) = 1 52 41.00 1 1 58.4 Extent = 21.7" x 21.7", rotation angle = 0 degrees Source counts = 106.3 +/- 15.5 Background counts = 250.8 Rate = 0.005 +/- 0.0008 [Tue Jun 18 19:30:28 2013] Off-axis axis estimate = 2.71' [Tue Jun 18 20:21:08 2013] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting [Tue Jun 18 20:21:08 2013] Initial guess for spatial extent in simple fitting = 7.78" [Tue Jun 18 20:21:08 2013] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.572 [Tue Jun 18 20:21:08 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.78" [Tue Jun 18 21:18:19 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass0_src8.ximg exists [Tue Jun 18 21:18:19 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass0_src8_1.ximg exists [Tue Jun 18 21:18:19 2013] Fit fullrun_mos1_xmm0084230401_pi300-10000_cl_pass0_src8 appears to have run properly [Tue Jun 18 21:18:20 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Tue Jun 18 21:18:20 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Tue Jun 18 21:18:20 2013] Fit fullrun_mos1_xmm0084230401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Tue Jun 18 22:03:59 2013] Source 25 is offset by -4.169519 and -8.299791 pixels which is larger than 2 X fitted extent = 7.157701 x 7.157701, not incorporating fit results [Tue Jun 18 22:03:59 2013] Vigneting correction estimate = 1.000000 [Tue Jun 18 22:03:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 18 22:03:59 2013] Assessing source extent using major [Tue Jun 18 22:03:59 2013] Source does appear to be extended [Tue Jun 18 22:03:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 18 22:56:16 2013] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting [Tue Jun 18 22:56:16 2013] Initial guess for spatial extent in simple fitting = 7.78" [Tue Jun 18 22:56:16 2013] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.572 [Tue Jun 18 22:56:16 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.78" [Tue Jun 18 23:45:16 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_src8.ximg exists [Tue Jun 18 23:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_src8.csv [Tue Jun 18 23:45:16 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_src8_1.ximg exists [Tue Jun 18 23:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_src8.csv [Tue Jun 18 23:45:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 18 23:45:16 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Tue Jun 18 23:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src8.csv [Tue Jun 18 23:45:16 2013] fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Tue Jun 18 23:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src8.csv [Tue Jun 18 23:45:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0084230401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 19 00:24:57 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.845103 pixels away [Wed Jun 19 00:24:57 2013] Vigneting correction estimate = 1.000000 [Wed Jun 19 00:24:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 19 00:24:57 2013] Assessing source extent using major [Wed Jun 19 00:24:57 2013] Source does appear to be extended [Wed Jun 19 00:24:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 19 00:24:57 2013] Source is confused with source 1 [Wed Jun 19 01:12:01 2013] XMMSAS src. selection expression = ellipse(27806.901825, 28562.138184, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed Jun 19 01:12:01 2013] Writing source region out to fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25_src.reg [Wed Jun 19 01:12:01 2013] Extracting stamp from image fullrun_mos1_xmm0084230401_pi300-10000_cl_sm2.00.img.gz, (245, 254) - (395, 404) [Wed Jun 19 01:12:01 2013] XMMSAS bgd. selection expression = annulus(27806.901825, 28562.138184, 2175.000000, 4350.000000, X, Y) && !ellipse(27470.040800, 27065.713940, 2142.288062, 1639.712047, 66.216500, X, Y) && !ellipse(23934.427600, 31750.488600, 352.113610, 352.113610, 0.000000, X, Y) && !ellipse(28299.914215, 25291.216431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.254120, 25591.364000, 1167.728034, 1167.728034, 0.000000, X, Y) && !ellipse(29764.792114, 32410.175690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25223.003200, 32617.677000, 515.179215, 287.150408, 6.264910, X, Y) && !ellipse(24670.904240, 26070.166600, 487.501614, 487.501614, 0.000000, X, Y) && !ellipse(27757.560760, 24933.807007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26148.448395, 28015.695984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26567.730621, 25360.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.963593, 25920.153046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.328766, 25676.442596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28377.690643, 24745.353027, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 19 01:12:01 2013] Writing fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25.gif [Wed Jun 19 01:25:41 2013] Mean detx,y = (1177.57, -574.92) [Wed Jun 19 01:25:43 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 19 01:26:03 2013] Binned source spectrum to 10 counts/bin [Wed Jun 19 01:26:03 2013] Setting source spectrum file to fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Wed Jun 19 01:26:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25_bgd.pi.gz [Wed Jun 19 01:38:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jun 19 01:38:58 2013] rmf not generated due to insufficient counts [Wed Jun 19 02:13:01 2013] Updating aperture counts using extracted products [Wed Jun 19 02:13:01 2013] Total counts from fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 2670.00 [Wed Jun 19 02:13:01 2013] Total counts from fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25_bgd.pi.gz = 2722.00 [Wed Jun 19 02:13:01 2013] Got source and background scale factors 5182560.000000, 30652128.000000 [Wed Jun 19 02:13:01 2013] User source parameters: Position = (320.2, 328.9) = 1 52 41.00 1 1 58.4 Extent = 21.7" x 21.7", rotation angle = 0 Source aperture counts = 2209.8 +/- 52.7 Background aperture counts = 460.2 Rate = 0.1 +/- 0.003 [Wed Jun 19 02:13:01 2013] Updating counts from extracted products [Wed Jun 19 02:13:01 2013] Set source signif. to 2209.77/21.45 = 103.01 [Wed Jun 19 02:13:06 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 19 02:13:06 2013] Using photon index=1.80, rate=0.115, arf fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25.arf [Wed Jun 19 02:13:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 19 02:13:06 2013] Updating source flux to 1.2e-12 [Wed Jun 19 02:13:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 19 02:13:20 2013] xmm0084230401/analysis//spectral/fullrun_mos1_xmm0084230401_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete