[Sun May 19 09:05:47 2013] Detection parameters:
  Position = (209.4, 280.2) = 1 32 25.94 -13 39 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.8 +/- 10.5
  Background counts = 23.0
  Rate = 0.003 +/- 0.0006

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 6.59'
[Sun May 19 09:07:51 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Sun May 19 09:07:51 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.936
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 9.72"
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src42.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src42.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src42.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun May 19 11:25:28 2013] Fit fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sun May 19 14:24:26 2013] Spatial fit model total counts = 139.494000, observed total counts = 128.000000
[Sun May 19 14:24:26 2013] Offset between fit and detection position for source 43 = 0.213464 pixels
[Sun May 19 14:24:26 2013] 140.678500 total counts/ 101.430000 bgd. counts: snr = 3.897085
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.213464 pixels
  Position = (209.3, 280.3) = 1 32 25.99 -13 39 11.3
  Extent = 6.9 (4.7-10.4)", rotation angle = 0
  Source counts = 39.2 +/- 11.9
  Background counts = 101.4
  Rate = 0.003 +/- 0.0008
[Sun May 19 14:24:26 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:26 2013] Assessing source extent using major axis lower bound
[Sun May 19 14:24:26 2013] Source does appear to be extended
[Sun May 19 14:24:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 14:24:51 2013] Initial guess for spatial extent in simple fitting = 6.87"
[Sun May 19 14:24:51 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Sun May 19 14:24:51 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 6.87"
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src38.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src38.csv
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src38.csv
[Sun May 19 16:11:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 16:11:36 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun May 19 16:11:36 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun May 19 16:11:36 2013] Fit fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sun May 19 18:41:28 2013] Spatial fit model total counts = 139.501000, observed total counts = 128.000000
[Sun May 19 18:41:28 2013] Offset between fit and detection position for source 43 = 0.004790 pixels
[Sun May 19 18:41:28 2013] 140.708300 total counts/ 101.914000 bgd. counts: snr = 3.842828
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.004790 pixels
  Position = (209.3, 280.3) = 1 32 25.99 -13 39 11.3
  Extent = 6.8 (4.7-10.4)", rotation angle = 0
  Source counts = 38.8 +/- 11.9
  Background counts = 101.9
  Rate = 0.002 +/- 0.0008
[Sun May 19 18:41:29 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:29 2013] Assessing source extent using major axis lower bound
[Sun May 19 18:41:29 2013] Source does appear to be extended
[Sun May 19 18:41:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:41:49 2013] XMMSAS src. selection expression = ellipse(18158.191800, 24339.804400, 406.686612, 406.686612, 0.000000, X, Y)
[Sun May 19 18:41:49 2013] Writing source region out to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43_src.reg
[Sun May 19 18:41:49 2013] Extracting stamp from image fullrun_pn_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (186, 257) - (233, 304)
[Sun May 19 18:41:49 2013] XMMSAS bgd. selection expression = annulus(18158.191800, 24339.804400, 677.811020, 1355.622039, X, Y)
[Sun May 19 18:41:49 2013] Writing fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43.gif
[Sun May 19 19:02:34 2013] Mean detx,y = (-7994.03, 5333.35) 
[Sun May 19 19:02:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 19:02:58 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 19:02:59 2013] Setting source spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun May 19 19:02:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun May 19 20:06:16 2013] Not generating rmf since there are only 38 counts
[Sun May 19 20:06:16 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:51 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:51 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 62.00
[Sun May 19 21:31:51 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43_bgd.pi.gz = 263.00
[Sun May 19 21:31:51 2013] Got source and background scale factors 441912.000000, 4067539.000000
[Sun May 19 21:31:51 2013] User source parameters:
  Position = (209.3, 280.3) = 1 32 25.99 -13 39 11.3
  Extent = 6.8 (4.7-10.4)", rotation angle = 0
  Source aperture counts = 33.4 +/- 8.9
  Background aperture counts = 28.6
  Rate = 0.002 +/- 0.0006

[Sun May 19 21:31:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:53 2013] Using photon index=1.80, rate=0.00249, arf fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43.arf
[Sun May 19 21:31:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:53 2013] Updating source flux to 1.6e-14
[Sun May 19 21:32:10 2013] Source 43 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 21:32:11 2013] xmm0084230301/analysis//spectral/fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete