[Sun May 19 09:05:46 2013] Detection parameters:
  Position = (324.0, 327.6) = 1 31 51.75 -13 35 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 442.9 +/- 29.3
  Background counts = 113.0
  Rate = 0.03 +/- 0.002

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 2.81'
[Sun May 19 09:07:51 2013] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 7.83"
[Sun May 19 09:07:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.897
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.83"
[Sun May 19 11:25:26 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 19 11:25:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src3.csv
[Sun May 19 11:25:26 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 19 11:25:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src3.csv
[Sun May 19 11:25:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:26 2013] Source 4 is offset by 0.405436 and -1.976259 pixels which is larger than
2 X fitted extent = 6.209150 x 1.478782, not incorporating fit results
[Sun May 19 14:24:26 2013] Source 4 is offset by -0.338573 and -3.847130 pixels which is larger than
2 X fitted extent = 7.575081 x 0.946887, not incorporating fit results
[Sun May 19 14:24:26 2013] Source 4 is offset by 3.120668 and -3.034333 pixels which is larger than
2 X fitted extent = 1.715481 x 1.715481, not incorporating fit results
[Sun May 19 14:24:26 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:26 2013] Assessing source extent using major
[Sun May 19 14:24:26 2013] Source does appear to be extended
[Sun May 19 14:24:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:51 2013] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:24:51 2013] Initial guess for spatial extent in simple fitting = 7.83"
[Sun May 19 14:24:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.897
[Sun May 19 14:24:51 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.83"
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src3.csv
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src3.csv
[Sun May 19 16:11:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 16:11:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:28 2013] Spatial fit model total counts = 3210.730000, observed total counts = 2141.000000
[Sun May 19 18:41:28 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 18:41:28 2013] Source 4 is offset by 0.795220 and -3.847130 pixels which is larger than
2 X fitted extent = 7.575081 x 0.946887, not incorporating fit results
[Sun May 19 18:41:28 2013] Source 4 is offset by 3.078852 and -3.011057 pixels which is larger than
2 X fitted extent = 1.802285 x 1.802285, not incorporating fit results
[Sun May 19 18:41:28 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:28 2013] Assessing source extent using major
[Sun May 19 18:41:28 2013] Source does appear to be extended
[Sun May 19 18:41:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:41:48 2013] XMMSAS src. selection expression = ellipse(28139.776123, 28450.767670, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing source region out to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4_src.reg
[Sun May 19 18:41:48 2013] Extracting stamp from image fullrun_pn_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (287, 290) - (362, 365)
[Sun May 19 18:41:48 2013] XMMSAS bgd. selection expression = annulus(28139.776123, 28450.767670, 1087.500000, 2175.000000, X, Y) && !ellipse(27897.095825, 27272.409912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.582458, 28149.745758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.979797, 27013.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.503601, 29862.274170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.247650, 29607.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.068634, 29375.758636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27493.677399, 29159.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29370.655670, 28916.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.441589, 28835.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.774445, 28654.270355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.077484, 28396.100616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.250397, 28389.917053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.802979, 27915.495178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.665680, 26137.738007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.109070, 25718.190277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.350525, 25735.325836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25102.287201, 25451.054504, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4.gif
[Sun May 19 18:45:16 2013] Mean detx,y = (223.90, -1641.79) 
[Sun May 19 18:45:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 18:45:33 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 18:45:34 2013] Setting source spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 19 18:45:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 19 19:46:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 19:46:52 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:41 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:42 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1431.00
[Sun May 19 21:31:42 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 3815.00
[Sun May 19 21:31:42 2013] Got source and background scale factors 923504.000000, 2459480.000000
[Sun May 19 21:31:42 2013] User source parameters:
  Position = (324.0, 327.6) = 1 31 51.75 -13 35 47.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -1.5 +/- 38.8
  Background aperture counts = 1432.5
  Rate = -0.0001 +/- 0.002

[Sun May 19 21:31:42 2013] Updating counts from extracted products
[Sun May 19 21:31:42 2013] Set source signif. to -1.48/37.85 = -0.04
[Sun May 19 21:31:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:53 2013] Using photon index=1.80, rate=-9.53e-05, arf fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4.arf
[Sun May 19 21:31:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:53 2013] Updated flux is not positive, keeping original flux
[Sun May 19 21:32:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:11 2013] xmm0084230301/analysis//spectral/fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete