[Sun May 19 09:05:46 2013] Detection parameters:
  Position = (340.2, 291.5) = 1 31 46.91 -13 38 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.1 +/- 16.2
  Background counts = 87.5
  Rate = 0.004 +/- 0.001

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 3.07'
[Sun May 19 09:07:51 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 7.96"
[Sun May 19 09:07:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.150
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 7.96"
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src36.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src36.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src36.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun May 19 11:25:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:26 2013] Spatial fit model total counts = 1727.970000, observed total counts = 1728.000000
[Sun May 19 14:24:26 2013] Offset between fit and detection position for source 37 = 1.330934 pixels
[Sun May 19 14:24:26 2013] Warning, changing simple spatial fit ID from 36 to 33
[Sun May 19 14:24:26 2013] 1679.209300 total counts/ 1631.010000 bgd. counts: snr = 1.193473
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 1.330934 pixels
  Position = (340.6, 290.2) = 1 31 46.79 -13 38 28.4
  Extent = 10.6 (5.8-15.5)", rotation angle = 77 (67-85) degrees
  Source counts = 48.2 +/- 41.0
  Background counts = 1631.0
  Rate = 0.003 +/- 0.003
  Deleting source due to low Poisson probability