[Sun May 19 09:05:46 2013] Detection parameters:
  Position = (314.9, 329.9) = 1 31 54.48 -13 35 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.3 +/- 25.2
  Background counts = 103.9
  Rate = 0.02 +/- 0.002

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 2.57'
[Sun May 19 09:07:51 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sun May 19 09:07:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 7.72"
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src27.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src27.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src27.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May 19 11:25:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:26 2013] Warning, spatial fit 27 centroid is now closest to src. 4
[Sun May 19 14:24:26 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:26 2013] Assessing source extent using major
[Sun May 19 14:24:26 2013] Source does appear to be extended
[Sun May 19 14:24:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:26 2013] Source is confused with source 22
[Sun May 19 14:24:51 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:24:51 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sun May 19 14:24:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun May 19 14:24:51 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 7.72"
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src25.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src25.csv
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src25.csv
[Sun May 19 16:11:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun May 19 16:11:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:28 2013] Source 28 is offset by 5.147384 and -3.884410 pixels which is larger than
2 X fitted extent = 1.547149 x 1.547149, not incorporating fit results
[Sun May 19 18:41:28 2013] Warning, spatial fit 25 centroid is now closest to src. 4
[Sun May 19 18:41:29 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:29 2013] Assessing source extent using major
[Sun May 19 18:41:29 2013] Source does appear to be extended
[Sun May 19 18:41:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:41:48 2013] XMMSAS src. selection expression = ellipse(27343.774445, 28654.270355, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing source region out to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28_src.reg
[Sun May 19 18:41:48 2013] Extracting stamp from image fullrun_pn_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (277, 292) - (352, 367)
[Sun May 19 18:41:48 2013] XMMSAS bgd. selection expression = annulus(27343.774445, 28654.270355, 1087.500000, 2175.000000, X, Y) && !ellipse(27897.095825, 27272.409912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.776123, 28450.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.582458, 28149.745758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.979797, 27013.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.503601, 29862.274170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.247650, 29607.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.068634, 29375.758636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27493.677399, 29159.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29370.655670, 28916.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.441589, 28835.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.077484, 28396.100616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.250397, 28389.917053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.802979, 27915.495178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.665680, 26137.738007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.109070, 25718.190277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.350525, 25735.325836, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28.gif
[Sun May 19 18:56:11 2013] Mean detx,y = (-491.92, -1611.67) 
[Sun May 19 18:56:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 18:56:34 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 18:56:34 2013] Setting source spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun May 19 18:56:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun May 19 19:59:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 19:59:44 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:47 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:47 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 1318.00
[Sun May 19 21:31:47 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28_bgd.pi.gz = 4528.00
[Sun May 19 21:31:48 2013] Got source and background scale factors 1123586.000000, 4250080.000000
[Sun May 19 21:31:48 2013] User source parameters:
  Position = (314.9, 329.9) = 1 31 54.48 -13 35 34.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 120.9 +/- 37.3
  Background aperture counts = 1197.1
  Rate = 0.008 +/- 0.002

[Sun May 19 21:31:48 2013] Updating counts from extracted products
[Sun May 19 21:31:48 2013] Set source signif. to 120.94/34.60 = 3.50
[Sun May 19 21:31:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:53 2013] Using photon index=1.80, rate=0.00776, arf fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28.arf
[Sun May 19 21:31:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:53 2013] Updating source flux to 2.5e-14
[Sun May 19 21:32:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:11 2013] xmm0084230301/analysis//spectral/fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete