[Sun May 19 09:05:46 2013] Detection parameters:
  Position = (309.3, 333.0) = 1 31 56.14 -13 35 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.0 +/- 23.5
  Background counts = 93.1
  Rate = 0.02 +/- 0.002

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 2.63'
[Sun May 19 09:07:51 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Sun May 19 09:07:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.74"
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src25.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src25.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 19 11:25:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:26 2013] Spatial fit model total counts = 1683.470000, observed total counts = 1684.000000
[Sun May 19 14:24:26 2013] Offset between fit and detection position for source 26 = 0.877083 pixels
[Sun May 19 14:24:26 2013] Warning, changing simple spatial fit ID from 25 to 21
[Sun May 19 14:24:26 2013] 1625.855300 total counts/ 1603.650000 bgd. counts: snr = 0.554500
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.877083 pixels
  Position = (309.7, 333.8) = 1 31 56.02 -13 35 18.8
  Extent = 3.6 (2.0-8.7)", rotation angle = 0
  Source counts = 22.2 +/- 40.3
  Background counts = 1603.7
  Rate = 0.001 +/- 0.003
  Deleting source due to low Poisson probability