[Sun May 19 09:05:46 2013] Detection parameters:
  Position = (328.6, 338.2) = 1 31 50.38 -13 35 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.1 +/- 16.8
  Background counts = 109.2
  Rate = 0.01 +/- 0.001

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 3.62'
[Sun May 19 09:07:51 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Sun May 19 09:07:51 2013] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.785
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.24"
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src20.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src20.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src20.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun May 19 11:25:28 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May 19 11:25:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun May 19 11:25:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:26 2013] Warning, spatial fit 20 centroid is now closest to src. 4
[Sun May 19 14:24:26 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:26 2013] Assessing source extent using major
[Sun May 19 14:24:26 2013] Source does appear to be extended
[Sun May 19 14:24:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:26 2013] Source is confused with source 17
[Sun May 19 14:24:51 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:24:51 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Sun May 19 14:24:51 2013] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.785
[Sun May 19 14:24:51 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.24"
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src19.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src19.csv
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src19.csv
[Sun May 19 16:11:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun May 19 16:11:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:28 2013] Warning, spatial fit 19 centroid is now closest to src. 4
[Sun May 19 18:41:29 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:29 2013] Assessing source extent using major
[Sun May 19 18:41:29 2013] Source does appear to be extended
[Sun May 19 18:41:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:41:48 2013] XMMSAS src. selection expression = ellipse(28539.068634, 29375.758636, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing source region out to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21_src.reg
[Sun May 19 18:41:48 2013] Extracting stamp from image fullrun_pn_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (291, 301) - (366, 376)
[Sun May 19 18:41:48 2013] XMMSAS bgd. selection expression = annulus(28539.068634, 29375.758636, 1087.500000, 2175.000000, X, Y) && !ellipse(27897.095825, 27272.409912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.776123, 28450.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.582458, 28149.745758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.979797, 27013.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.503601, 29862.274170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.247650, 29607.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27493.677399, 29159.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29370.655670, 28916.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.441589, 28835.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.774445, 28654.270355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.077484, 28396.100616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.250397, 28389.917053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.802979, 27915.495178, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21.gif
[Sun May 19 18:53:17 2013] Mean detx,y = (334.75, -2572.06) 
[Sun May 19 18:53:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 18:53:32 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 18:53:32 2013] Setting source spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun May 19 18:53:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun May 19 19:58:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 19:58:50 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:46 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:46 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 1005.00
[Sun May 19 21:31:46 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1435.00
[Sun May 19 21:31:46 2013] Got source and background scale factors 1034452.000000, 3808988.000000
[Sun May 19 21:31:46 2013] User source parameters:
  Position = (328.6, 338.2) = 1 31 50.38 -13 35 3.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 615.3 +/- 32.7
  Background aperture counts = 389.7
  Rate = 0.04 +/- 0.002

[Sun May 19 21:31:46 2013] Updating counts from extracted products
[Sun May 19 21:31:46 2013] Set source signif. to 615.28/19.74 = 31.17
[Sun May 19 21:31:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:53 2013] Using photon index=1.80, rate=0.0395, arf fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21.arf
[Sun May 19 21:31:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:53 2013] Updating source flux to 1.4e-13
[Sun May 19 21:32:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:11 2013] xmm0084230301/analysis//spectral/fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete