[Sun May 19 09:05:46 2013] Detection parameters:
  Position = (338.6, 340.9) = 1 31 47.38 -13 34 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.2 +/- 18.1
  Background counts = 107.2
  Rate = 0.006 +/- 0.001

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 4.24'
[Sun May 19 09:07:51 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Sun May 19 09:07:51 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.55"
[Sun May 19 11:25:26 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src18.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src18.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src18.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:26 2013] Spatial fit model total counts = 1659.820000, observed total counts = 1245.000000
[Sun May 19 14:24:26 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:24:26 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:26 2013] Assessing source extent using major
[Sun May 19 14:24:26 2013] Source does appear to be extended
[Sun May 19 14:24:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:51 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:24:51 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Sun May 19 14:24:51 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Sun May 19 14:24:51 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.55"
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src17.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src17.csv
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src17.csv
[Sun May 19 16:11:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun May 19 16:11:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:28 2013] Spatial fit model total counts = 1660.590000, observed total counts = 1245.000000
[Sun May 19 18:41:28 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 18:41:29 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:29 2013] Assessing source extent using major
[Sun May 19 18:41:29 2013] Source does appear to be extended
[Sun May 19 18:41:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:41:48 2013] XMMSAS src. selection expression = ellipse(29413.247650, 29607.367462, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing source region out to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19_src.reg
[Sun May 19 18:41:48 2013] Extracting stamp from image fullrun_pn_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (301, 303) - (376, 378)
[Sun May 19 18:41:48 2013] XMMSAS bgd. selection expression = annulus(29413.247650, 29607.367462, 1087.500000, 2175.000000, X, Y) && !ellipse(27897.095825, 27272.409912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.776123, 28450.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.582458, 28149.745758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.979797, 27013.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.503601, 29862.274170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.068634, 29375.758636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27493.677399, 29159.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29370.655670, 28916.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.441589, 28835.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.774445, 28654.270355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.077484, 28396.100616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.250397, 28389.917053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.802979, 27915.495178, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19.gif
[Sun May 19 18:52:20 2013] Mean detx,y = (1208.48, -3020.89) 
[Sun May 19 18:52:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 18:52:38 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 18:52:39 2013] Setting source spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun May 19 18:52:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun May 19 19:58:29 2013] Not generating rmf since there are only 81 counts
[Sun May 19 19:58:29 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:45 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:45 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 889.00
[Sun May 19 21:31:45 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1446.00
[Sun May 19 21:31:45 2013] Got source and background scale factors 1151524.000000, 4705546.000000
[Sun May 19 21:31:45 2013] User source parameters:
  Position = (338.6, 340.9) = 1 31 47.38 -13 34 50.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 535.1 +/- 30.8
  Background aperture counts = 353.9
  Rate = 0.03 +/- 0.002

[Sun May 19 21:31:45 2013] Updating counts from extracted products
[Sun May 19 21:31:45 2013] Set source signif. to 535.14/18.81 = 28.45
[Sun May 19 21:31:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:53 2013] Using photon index=1.80, rate=0.0343, arf fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19.arf
[Sun May 19 21:31:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:53 2013] Updating source flux to 1.1e-13
[Sun May 19 21:32:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:11 2013] xmm0084230301/analysis//spectral/fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete