[Sun May 19 09:05:46 2013] Detection parameters:
  Position = (326.0, 343.8) = 1 31 51.15 -13 34 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 18.4
  Background counts = 102.2
  Rate = 0.006 +/- 0.001

[Sun May 19 09:05:47 2013] Off-axis axis estimate = 3.85'
[Sun May 19 09:07:51 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:07:51 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sun May 19 09:07:51 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854
[Sun May 19 09:07:51 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.35"
[Sun May 19 11:25:26 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src16.ximg exists
[Sun May 19 11:25:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src16.csv
[Sun May 19 11:25:26 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun May 19 11:25:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src16.csv
[Sun May 19 11:25:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun May 19 11:25:27 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun May 19 11:25:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun May 19 11:25:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:26 2013] Warning, spatial fit 16 centroid is now closest to src. 18
[Sun May 19 14:24:26 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:26 2013] Assessing source extent using major
[Sun May 19 14:24:26 2013] Source does appear to be extended
[Sun May 19 14:24:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:26 2013] Source is confused with source 21
[Sun May 19 14:24:51 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:24:51 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sun May 19 14:24:51 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854
[Sun May 19 14:24:51 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 8.35"
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src16.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src16.csv
[Sun May 19 16:11:34 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun May 19 16:11:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src16.csv
[Sun May 19 16:11:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun May 19 16:11:35 2013] fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun May 19 16:11:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun May 19 16:11:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:28 2013] Source 17 is offset by 7.289605 and -3.096970 pixels which is larger than
2 X fitted extent = 1.245416 x 1.121494, not incorporating fit results
[Sun May 19 18:41:29 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:29 2013] Assessing source extent using major
[Sun May 19 18:41:29 2013] Source does appear to be extended
[Sun May 19 18:41:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:41:48 2013] XMMSAS src. selection expression = ellipse(28314.503601, 29862.274170, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing source region out to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17_src.reg
[Sun May 19 18:41:48 2013] Extracting stamp from image fullrun_pn_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (289, 306) - (364, 381)
[Sun May 19 18:41:48 2013] XMMSAS bgd. selection expression = annulus(28314.503601, 29862.274170, 1087.500000, 2175.000000, X, Y) && !ellipse(27897.095825, 27272.409912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.776123, 28450.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.582458, 28149.745758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.979797, 27013.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.247650, 29607.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.068634, 29375.758636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27493.677399, 29159.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29370.655670, 28916.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.441589, 28835.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.774445, 28654.270355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.077484, 28396.100616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.250397, 28389.917053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.802979, 27915.495178, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 18:41:48 2013] Writing fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17.gif
[Sun May 19 18:51:54 2013] Mean detx,y = (0.41, -2953.30) 
[Sun May 19 18:51:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 18:52:14 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 18:52:14 2013] Setting source spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun May 19 18:52:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun May 19 19:58:20 2013] Not generating rmf since there are only 85 counts
[Sun May 19 19:58:20 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:45 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:45 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 895.00
[Sun May 19 21:31:45 2013] Total counts from fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1715.00
[Sun May 19 21:31:45 2013] Got source and background scale factors 1228945.000000, 5299518.000000
[Sun May 19 21:31:45 2013] User source parameters:
  Position = (326.0, 343.8) = 1 31 51.15 -13 34 34.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 497.3 +/- 30.9
  Background aperture counts = 397.7
  Rate = 0.03 +/- 0.002

[Sun May 19 21:31:45 2013] Updating counts from extracted products
[Sun May 19 21:31:45 2013] Set source signif. to 497.30/19.94 = 24.94
[Sun May 19 21:31:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:53 2013] Using photon index=1.80, rate=0.0319, arf fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17.arf
[Sun May 19 21:31:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:53 2013] Updating source flux to 1e-13
[Sun May 19 21:32:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:11 2013] xmm0084230301/analysis//spectral/fullrun_pn_xmm0084230301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete