[Sun May 19 09:06:38 2013] Detection parameters:
  Position = (324.4, 295.1) = 1 31 51.64 -13 38 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.0 +/- 18.2
  Background counts = 38.9
  Rate = 0.006 +/- 0.0009

[Sun May 19 09:06:39 2013] Off-axis axis estimate = 1.89'
[Sun May 19 12:49:06 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sun May 19 12:49:06 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Sun May 19 12:49:06 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.037
[Sun May 19 12:49:06 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.38"
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src7.csv
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src7.csv
[Sun May 19 14:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:15 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 19 14:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 19 14:24:15 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 19 14:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 19 14:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:40 2013] Warning, spatial fit 7 centroid is now closest to src. 29
[Sun May 19 14:24:40 2013] Spatial fit model total counts = 730.655000, observed total counts = 726.000000
[Sun May 19 14:24:40 2013] Offset between fit and detection position for source 9 = 0.496790 pixels
[Sun May 19 14:24:40 2013] Warning, changing simple spatial fit ID from 7 to 33
[Sun May 19 14:24:40 2013] 729.913800 total counts/ 718.204000 bgd. counts: snr = 0.436944
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.496790 pixels
  Position = (324.8, 295.1) = 1 31 51.50 -13 38 6.9
  Extent = 2.3 (1.9-4.7)", rotation angle = 0
  Source counts = 11.7 +/- 27.0
  Background counts = 718.2
  Rate = 0.0005 +/- 0.001
  Deleting source due to low Poisson probability