[Sun May 19 09:06:38 2013] Detection parameters:
  Position = (327.8, 310.8) = 1 31 50.61 -13 36 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 378.2 +/- 28.2
  Background counts = 45.4
  Rate = 0.02 +/- 0.001

[Sun May 19 09:06:39 2013] Off-axis axis estimate = 2.31'
[Sun May 19 12:49:06 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sun May 19 12:49:06 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Sun May 19 12:49:06 2013] source mask rpix=1.7, npix_max = 20, mask sum = 15, frac = 0.745
[Sun May 19 12:49:06 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.58"
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src4.csv
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src4.csv
[Sun May 19 14:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May 19 14:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:40 2013] Spatial fit model total counts = 3287.210000, observed total counts = 2743.000000
[Sun May 19 14:24:40 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:24:40 2013] Source 3 is offset by -6.411672 and -1.724875 pixels which is larger than
2 X fitted extent = 5.603265 x 5.603265, not incorporating fit results
[Sun May 19 14:24:40 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:40 2013] Assessing source extent using major
[Sun May 19 14:24:40 2013] Source does appear to be extended
[Sun May 19 14:24:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:40 2013] Source is confused with source 1
[Sun May 19 17:09:01 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:09:01 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Sun May 19 17:09:01 2013] source mask rpix=1.7, npix_max = 20, mask sum = 15, frac = 0.745
[Sun May 19 17:09:01 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.58"
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src4.csv
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src4.csv
[Sun May 19 18:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 19 18:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:38 2013] Warning, spatial fit 4 centroid is now closest to src. 25
[Sun May 19 18:41:38 2013] Spatial fit model total counts = 2913.380000, observed total counts = 2490.000000
[Sun May 19 18:41:38 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 18:41:38 2013] Spatial fit model total counts = 991.260000, observed total counts = 994.000000
[Sun May 19 18:41:38 2013] Offset between fit and detection position for source 3 = 3.300180 pixels
[Sun May 19 18:41:38 2013] Warning, changing simple spatial fit ID from 4 to 18
[Sun May 19 18:41:38 2013] 986.012000 total counts/ 872.203000 bgd. counts: snr = 3.853611
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.300180 pixels
  Position = (329.8, 308.2) = 1 31 50.02 -13 37 10.2
  Extent = 15.6 (15.6-31.3)", rotation angle = 0
  Source counts = 113.8 +/- 31.4
  Background counts = 872.2
  Rate = 0.005 +/- 0.001
[Sun May 19 18:41:38 2013] Spatial fit model total counts = 1950.690000, observed total counts = 1954.000000
[Sun May 19 18:41:38 2013] Offset between fit and detection position for source 3 = 1.391205 pixels
[Sun May 19 18:41:38 2013] Warning, changing simple spatial fit ID from 18 to 20
[Sun May 19 18:41:38 2013] 1801.793000 total counts/ 1167.870000 bgd. counts: snr = 18.549801
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.391205 pixels
  Position = (330.3, 309.5) = 1 31 49.87 -13 37 4.5
  Extent = 24.6 (24.5-49.2)", rotation angle = 0
  Source counts = 633.9 +/- 42.4
  Background counts = 1167.9
  Rate = 0.03 +/- 0.002
[Sun May 19 18:41:38 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:38 2013] Assessing source extent using major axis lower bound
[Sun May 19 18:41:38 2013] Source does appear to be extended
[Sun May 19 18:41:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:09 2013] XMMSAS src. selection expression = ellipse(28689.112000, 26876.678400, 1475.016042, 1475.016042, 0.000000, X, Y)
[Sun May 19 20:33:09 2013] Writing source region out to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3_src.reg
[Sun May 19 20:33:09 2013] Extracting stamp from image fullrun_mos2_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (246, 225) - (415, 394)
[Sun May 19 20:33:09 2013] XMMSAS bgd. selection expression = annulus(28689.112000, 26876.678400, 2458.360071, 4916.720141, X, Y) && !ellipse(27518.350000, 27224.348000, 1921.056055, 1921.056055, 0.000000, X, Y) && !ellipse(26918.368600, 27081.821600, 1141.264033, 1141.264033, 0.000000, X, Y) && !ellipse(28381.221832, 26573.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33486.213928, 25697.165100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.611572, 28559.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29603.650421, 27423.345673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.356000, 28358.820000, 1176.152034, 1176.152034, 0.000000, X, Y) && !ellipse(27387.670044, 28652.300323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.038000, 29309.282000, 1318.088038, 1318.088038, 0.000000, X, Y) && !ellipse(29291.363220, 29088.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.829620, 28297.378662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29247.178223, 26061.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29958.203033, 28667.216278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.378000, 27143.400000, 986.352028, 986.352028, 0.000000, X, Y) && !ellipse(26304.057007, 25211.464661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.748444, 26492.686218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25914.558000, 27241.490000, 1140.504033, 1140.504033, 0.000000, X, Y)
[Sun May 19 20:33:09 2013] Writing fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3.gif
[Sun May 19 20:33:46 2013] Mean detx,y = (-754.88, 189.82) 
[Sun May 19 20:33:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 20:34:06 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 20:34:06 2013] Setting source spectrum file to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 19 20:34:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 19 21:31:58 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:58 2013] Total counts from fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 7022.00
[Sun May 19 21:31:58 2013] Total counts from fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 5917.00
[Sun May 19 21:31:58 2013] Got source and background scale factors 6371744.000000, 43219460.000000
[Sun May 19 21:31:58 2013] User source parameters:
  Position = (330.3, 309.5) = 1 31 49.87 -13 37 4.5
  Extent = 24.6 (24.5-49.2)", rotation angle = 0
  Source aperture counts = 6149.7 +/- 84.8
  Background aperture counts = 872.3
  Rate = 0.3 +/- 0.004

[Sun May 19 21:32:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:32:02 2013] Using photon index=1.80, rate=0.0294, arf fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3.arf
[Sun May 19 21:32:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:32:02 2013] Updating source flux to 2.7e-13
[Sun May 19 21:32:06 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Sun May 19 21:32:06 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Sun May 19 21:32:06 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Sun May 19 21:32:10 2013] xmm0084230301/analysis//spectral/fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete