[Sun May 19 09:06:39 2013] Detection parameters:
  Position = (334.7, 328.8) = 1 31 48.57 -13 35 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.4 +/- 16.9
  Background counts = 47.6
  Rate = 0.006 +/- 0.0009

[Sun May 19 09:06:39 2013] Off-axis axis estimate = 3.43'
[Sun May 19 12:49:06 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun May 19 12:49:06 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun May 19 12:49:06 2013] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.066
[Sun May 19 12:49:06 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.14"
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src10.csv
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src10.csv
[Sun May 19 14:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:15 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 19 14:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 19 14:24:15 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 19 14:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 19 14:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:40 2013] Source 20 is offset by 1.695963 and 6.166517 pixels which is larger than
2 X fitted extent = 2.921641 x 2.921641, not incorporating fit results
[Sun May 19 14:24:40 2013] Spatial fit model total counts = 954.444000, observed total counts = 830.000000
[Sun May 19 14:24:40 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:24:40 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:40 2013] Assessing source extent using major
[Sun May 19 14:24:40 2013] Source does appear to be extended
[Sun May 19 14:24:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:40 2013] Source is confused with source 16
[Sun May 19 14:24:40 2013] Source is confused with source 17
[Sun May 19 17:09:01 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:09:01 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun May 19 17:09:01 2013] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.066
[Sun May 19 17:09:01 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 8.14"
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src9.csv
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src9.csv
[Sun May 19 18:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 19 18:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:38 2013] Spatial fit model total counts = 1256.180000, observed total counts = 1087.000000
[Sun May 19 18:41:38 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 18:41:38 2013] Spatial fit model total counts = 964.174000, observed total counts = 830.000000
[Sun May 19 18:41:38 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 18:41:38 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:38 2013] Assessing source extent using major
[Sun May 19 18:41:38 2013] Source does appear to be extended
[Sun May 19 18:41:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:09 2013] XMMSAS src. selection expression = ellipse(29068.611572, 28559.676971, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:33:09 2013] Writing source region out to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20_src.reg
[Sun May 19 20:33:09 2013] Extracting stamp from image fullrun_mos2_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (297, 291) - (372, 366)
[Sun May 19 20:33:09 2013] XMMSAS bgd. selection expression = annulus(29068.611572, 28559.676971, 1087.500000, 2175.000000, X, Y) && !ellipse(27518.350000, 27224.348000, 1921.056055, 1921.056055, 0.000000, X, Y) && !ellipse(26918.368600, 27081.821600, 1141.264033, 1141.264033, 0.000000, X, Y) && !ellipse(28689.112000, 26876.678400, 1966.688057, 1966.688057, 0.000000, X, Y) && !ellipse(28381.221832, 26573.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29603.650421, 27423.345673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.356000, 28358.820000, 1176.152034, 1176.152034, 0.000000, X, Y) && !ellipse(27387.670044, 28652.300323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.038000, 29309.282000, 1318.088038, 1318.088038, 0.000000, X, Y) && !ellipse(29291.363220, 29088.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.829620, 28297.378662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29247.178223, 26061.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29958.203033, 28667.216278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.378000, 27143.400000, 986.352028, 986.352028, 0.000000, X, Y) && !ellipse(25914.558000, 27241.490000, 1140.504033, 1140.504033, 0.000000, X, Y)
[Sun May 19 20:33:09 2013] Writing fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20.gif
[Sun May 19 20:34:56 2013] Mean detx,y = (-1010.13, 1809.72) 
[Sun May 19 20:34:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 20:35:02 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 20:35:02 2013] Setting source spectrum file to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun May 19 20:35:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun May 19 21:04:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 21:04:37 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:59 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:59 2013] Total counts from fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 782.00
[Sun May 19 21:31:59 2013] Total counts from fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20_bgd.pi.gz = 483.00
[Sun May 19 21:31:59 2013] Got source and background scale factors 1166076.000000, 2260024.000000
[Sun May 19 21:31:59 2013] User source parameters:
  Position = (334.7, 328.8) = 1 31 48.57 -13 35 39.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 532.8 +/- 29.0
  Background aperture counts = 249.2
  Rate = 0.02 +/- 0.001

[Sun May 19 21:31:59 2013] Updating counts from extracted products
[Sun May 19 21:31:59 2013] Set source signif. to 532.79/15.79 = 33.75
[Sun May 19 21:32:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:32:02 2013] Using photon index=1.80, rate=0.0247, arf fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20.arf
[Sun May 19 21:32:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:32:02 2013] Updating source flux to 2.6e-13
[Sun May 19 21:32:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:10 2013] xmm0084230301/analysis//spectral/fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete