[Sun May 19 09:06:39 2013] Detection parameters:
  Position = (337.2, 334.9) = 1 31 47.80 -13 35 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.7 +/- 14.6
  Background counts = 45.8
  Rate = 0.004 +/- 0.0008

[Sun May 19 09:06:39 2013] Off-axis axis estimate = 3.86'
[Sun May 19 12:49:06 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun May 19 12:49:06 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sun May 19 12:49:06 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Sun May 19 12:49:06 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.36"
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src16.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src16.csv
[Sun May 19 14:24:14 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun May 19 14:24:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src16.csv
[Sun May 19 14:24:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:15 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun May 19 14:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun May 19 14:24:15 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun May 19 14:24:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun May 19 14:24:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:40 2013] Warning, spatial fit 16 centroid is now closest to src. 20
[Sun May 19 14:24:40 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:40 2013] Assessing source extent using major
[Sun May 19 14:24:40 2013] Source does appear to be extended
[Sun May 19 14:24:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:40 2013] Source is confused with source 20
[Sun May 19 17:09:01 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:09:01 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sun May 19 17:09:01 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Sun May 19 17:09:01 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 8.36"
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src15.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src15.csv
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src15.csv
[Sun May 19 18:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun May 19 18:41:18 2013] fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May 19 18:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun May 19 18:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:38 2013] Warning, spatial fit 15 centroid is now closest to src. 20
[Sun May 19 18:41:38 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:38 2013] Assessing source extent using major
[Sun May 19 18:41:38 2013] Source does appear to be extended
[Sun May 19 18:41:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:09 2013] XMMSAS src. selection expression = ellipse(29291.363220, 29088.096832, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:33:09 2013] Writing source region out to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17_src.reg
[Sun May 19 20:33:09 2013] Extracting stamp from image fullrun_mos2_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (300, 297) - (375, 372)
[Sun May 19 20:33:09 2013] XMMSAS bgd. selection expression = annulus(29291.363220, 29088.096832, 1087.500000, 2175.000000, X, Y) && !ellipse(27518.350000, 27224.348000, 1921.056055, 1921.056055, 0.000000, X, Y) && !ellipse(26918.368600, 27081.821600, 1141.264033, 1141.264033, 0.000000, X, Y) && !ellipse(28689.112000, 26876.678400, 1966.688057, 1966.688057, 0.000000, X, Y) && !ellipse(28381.221832, 26573.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.611572, 28559.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29603.650421, 27423.345673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.356000, 28358.820000, 1176.152034, 1176.152034, 0.000000, X, Y) && !ellipse(27387.670044, 28652.300323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.038000, 29309.282000, 1318.088038, 1318.088038, 0.000000, X, Y) && !ellipse(29871.829620, 28297.378662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29247.178223, 26061.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29958.203033, 28667.216278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29031.378000, 27143.400000, 986.352028, 986.352028, 0.000000, X, Y)
[Sun May 19 20:33:09 2013] Writing fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17.gif
[Sun May 19 20:35:56 2013] Mean detx,y = (-1066.14, 2382.66) 
[Sun May 19 20:35:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 20:36:06 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 20:36:06 2013] Setting source spectrum file to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun May 19 20:36:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun May 19 21:23:40 2013] Not generating rmf since there are only 75 counts
[Sun May 19 21:23:40 2013] rmf not generated due to insufficient counts
[Sun May 19 21:32:00 2013] Updating aperture counts using extracted products
[Sun May 19 21:32:00 2013] Total counts from fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 588.00
[Sun May 19 21:32:00 2013] Total counts from fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 846.00
[Sun May 19 21:32:00 2013] Got source and background scale factors 1181564.000000, 4275052.000000
[Sun May 19 21:32:00 2013] User source parameters:
  Position = (337.2, 334.9) = 1 31 47.80 -13 35 13.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 354.2 +/- 25.3
  Background aperture counts = 233.8
  Rate = 0.02 +/- 0.001

[Sun May 19 21:32:00 2013] Updating counts from extracted products
[Sun May 19 21:32:00 2013] Set source signif. to 354.18/15.29 = 23.16
[Sun May 19 21:32:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:32:02 2013] Using photon index=1.80, rate=0.0164, arf fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17.arf
[Sun May 19 21:32:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:32:02 2013] Updating source flux to 1.7e-13
[Sun May 19 21:32:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:10 2013] xmm0084230301/analysis//spectral/fullrun_mos2_xmm0084230301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete