[Sun May 19 09:06:14 2013] Detection parameters:
  Position = (385.3, 296.3) = 1 31 33.45 -13 38 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.1 +/- 15.0
  Background counts = 17.0
  Rate = 0.007 +/- 0.0008

[Sun May 19 09:06:14 2013] Off-axis axis estimate = 6.30'
[Sun May 19 11:25:28 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sun May 19 11:25:28 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Sun May 19 11:25:28 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Sun May 19 11:25:28 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.58"
[Sun May 19 12:49:04 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 19 12:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src7.csv
[Sun May 19 12:49:04 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 19 12:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src7.csv
[Sun May 19 12:49:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 12:49:05 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 19 12:49:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 19 12:49:05 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 19 12:49:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 19 12:49:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:33 2013] Source 8 is offset by 6.958881 and -3.924440 pixels which is larger than
2 X fitted extent = 1.101007 x 1.101007, not incorporating fit results
[Sun May 19 14:24:33 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:33 2013] Assessing source extent using major
[Sun May 19 14:24:33 2013] Source does appear to be extended
[Sun May 19 14:24:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 16:11:36 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sun May 19 16:11:36 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Sun May 19 16:11:36 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Sun May 19 16:11:36 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.58"
[Sun May 19 17:09:00 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src5.ximg exists
[Sun May 19 17:09:00 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May 19 17:09:00 2013] Fit fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src5 appears to have run properly
[Sun May 19 17:09:01 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May 19 17:09:01 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May 19 17:09:01 2013] Fit fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun May 19 18:41:33 2013] Spatial fit model total counts = 248.249000, observed total counts = 229.000000
[Sun May 19 18:41:33 2013] Offset between fit and detection position for source 8 = 0.107243 pixels
[Sun May 19 18:41:33 2013] 248.175600 total counts/ 162.792000 bgd. counts: snr = 6.692031
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.107243 pixels
  Position = (385.3, 296.4) = 1 31 33.47 -13 38 1.3
  Extent = 4.2 (3.3-5.2)", rotation angle = 0
  Source counts = 85.4 +/- 15.8
  Background counts = 162.8
  Rate = 0.004 +/- 0.0007
[Sun May 19 18:41:33 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:33 2013] Assessing source extent using major axis lower bound
[Sun May 19 18:41:33 2013] Source does appear to be extended
[Sun May 19 18:41:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:07:22 2013] XMMSAS src. selection expression = ellipse(33469.129000, 25739.509000, 252.275407, 252.275407, 0.000000, X, Y)
[Sun May 19 20:07:22 2013] Writing source region out to fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8_src.reg
[Sun May 19 20:07:22 2013] Extracting stamp from image fullrun_mos1_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (371, 282) - (400, 311)
[Sun May 19 20:07:22 2013] XMMSAS bgd. selection expression = annulus(33469.129000, 25739.509000, 420.459012, 840.918024, X, Y)
[Sun May 19 20:07:22 2013] Writing fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8.gif
[Sun May 19 20:08:11 2013] Mean detx,y = (760.67, 5870.26) 
[Sun May 19 20:08:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 20:08:21 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 20:08:21 2013] Setting source spectrum file to fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun May 19 20:08:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun May 19 20:23:47 2013] Not generating rmf since there are only 85 counts
[Sun May 19 20:23:47 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:54 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:54 2013] Total counts from fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 106.00
[Sun May 19 21:31:54 2013] Total counts from fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8_bgd.pi.gz = 107.00
[Sun May 19 21:31:54 2013] Got source and background scale factors 198400.000000, 1372964.000000
[Sun May 19 21:31:54 2013] User source parameters:
  Position = (385.3, 296.4) = 1 31 33.47 -13 38 1.3
  Extent = 4.2 (3.3-5.2)", rotation angle = 0
  Source aperture counts = 90.5 +/- 11.3
  Background aperture counts = 15.5
  Rate = 0.004 +/- 0.0005

[Sun May 19 21:31:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:58 2013] Using photon index=1.80, rate=0.00397, arf fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8.arf
[Sun May 19 21:31:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:58 2013] Updating source flux to 7.1e-14
[Sun May 19 21:32:04 2013] Flag b found in src. 8 procflags, skipping spectral fitting
[Sun May 19 21:32:04 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 21:32:06 2013] xmm0084230301/analysis//spectral/fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete