[Sun May 19 09:06:14 2013] Detection parameters:
  Position = (300.4, 307.9) = 1 31 58.79 -13 37 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.6 +/- 18.5
  Background counts = 30.7
  Rate = 0.008 +/- 0.0009

[Sun May 19 09:06:14 2013] Off-axis axis estimate = 0.70'
[Sun May 19 11:25:28 2013] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Sun May 19 11:25:28 2013] Initial guess for spatial extent in simple fitting = 6.78"
[Sun May 19 11:25:28 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Sun May 19 11:25:28 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 6.78"
[Sun May 19 12:49:04 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src6.ximg exists
[Sun May 19 12:49:04 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May 19 12:49:04 2013] Fit fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src6 appears to have run properly
[Sun May 19 12:49:05 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May 19 12:49:05 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May 19 12:49:05 2013] Fit fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun May 19 14:24:33 2013] Source 7 is offset by -5.074333 and 2.842050 pixels which is larger than
2 X fitted extent = 3.098460 x 1.002529, not incorporating fit results
[Sun May 19 14:24:33 2013] Source 7 is offset by 1.228173 and -1.567559 pixels which is larger than
2 X fitted extent = 0.949549 x 0.949549, not incorporating fit results
[Sun May 19 14:24:33 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:33 2013] Assessing source extent using major
[Sun May 19 14:24:33 2013] Source does appear to be extended
[Sun May 19 14:24:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 16:11:36 2013] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Sun May 19 16:11:36 2013] Initial guess for spatial extent in simple fitting = 6.78"
[Sun May 19 16:11:36 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Sun May 19 16:11:36 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 6.78"
[Sun May 19 17:09:00 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 19 17:09:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src4.csv
[Sun May 19 17:09:00 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 19 17:09:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src4.csv
[Sun May 19 17:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 17:09:01 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 19 17:09:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 19 17:09:01 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 19 17:09:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 19 17:09:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:41:33 2013] Source 7 is offset by -2.612977 and 5.918487 pixels which is larger than
2 X fitted extent = 1.686175 x 1.686175, not incorporating fit results
[Sun May 19 18:41:33 2013] Spatial fit model total counts = -0.829916, observed total counts = 1192.000000
[Sun May 19 18:41:33 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 18:41:33 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:41:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:41:33 2013] Assessing source extent using major
[Sun May 19 18:41:33 2013] Source does appear to be extended
[Sun May 19 18:41:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:07:22 2013] XMMSAS src. selection expression = ellipse(26086.095032, 26741.332367, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:07:22 2013] Writing source region out to fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7_src.reg
[Sun May 19 20:07:22 2013] Extracting stamp from image fullrun_mos1_xmm0084230301_pi300-10000_cl_sm2.00.img.gz, (263, 270) - (338, 345)
[Sun May 19 20:07:22 2013] XMMSAS bgd. selection expression = annulus(26086.095032, 26741.332367, 1087.500000, 2175.000000, X, Y) && !ellipse(27526.055960, 27316.785000, 1173.576034, 1173.576034, 0.000000, X, Y) && !ellipse(27935.521800, 27297.208800, 1197.688034, 946.264027, 351.554330, X, Y) && !ellipse(28075.104000, 25697.540000, 1201.264035, 1201.264035, 0.000000, X, Y) && !ellipse(26884.794200, 28220.712000, 1229.576035, 1229.576035, 0.000000, X, Y) && !ellipse(26896.368000, 27381.632000, 1167.736034, 1167.736034, 0.000000, X, Y) && !ellipse(26696.234039, 25370.745178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.434479, 29170.705414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.048462, 25272.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27264.325348, 25198.054108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28431.906342, 25045.214691, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:07:22 2013] Writing fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7.gif
[Sun May 19 20:07:59 2013] Mean detx,y = (-524.75, -1364.37) 
[Sun May 19 20:08:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 20:08:08 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 20:08:08 2013] Setting source spectrum file to fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 19 20:08:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 19 20:23:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 20:23:42 2013] rmf not generated due to insufficient counts
[Sun May 19 21:31:54 2013] Updating aperture counts using extracted products
[Sun May 19 21:31:54 2013] Total counts from fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 887.00
[Sun May 19 21:31:54 2013] Total counts from fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7_bgd.pi.gz = 872.00
[Sun May 19 21:31:54 2013] Got source and background scale factors 1340760.000000, 4991180.000000
[Sun May 19 21:31:54 2013] User source parameters:
  Position = (300.4, 307.9) = 1 31 58.79 -13 37 10.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 652.8 +/- 30.8
  Background aperture counts = 234.2
  Rate = 0.03 +/- 0.001

[Sun May 19 21:31:54 2013] Updating counts from extracted products
[Sun May 19 21:31:54 2013] Set source signif. to 652.76/15.30 = 42.65
[Sun May 19 21:31:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 21:31:57 2013] Using photon index=1.80, rate=0.0303, arf fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7.arf
[Sun May 19 21:31:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 21:31:58 2013] Updating source flux to 3.1e-13
[Sun May 19 21:32:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 21:32:06 2013] xmm0084230301/analysis//spectral/fullrun_mos1_xmm0084230301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete