[Sun May 19 09:06:14 2013] Detection parameters:
  Position = (377.2, 262.5) = 1 31 35.87 -13 40 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.7 +/- 8.7
  Background counts = 14.7
  Rate = 0.002 +/- 0.0005

[Sun May 19 09:06:14 2013] Off-axis axis estimate = 6.28'
[Sun May 19 11:25:28 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Sun May 19 11:25:28 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Sun May 19 11:25:28 2013] source mask rpix=2.2, npix_max = 29, mask sum = 29, frac = 0.995
[Sun May 19 11:25:28 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.57"
[Sun May 19 12:49:04 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src26.ximg exists
[Sun May 19 12:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src26.csv
[Sun May 19 12:49:04 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun May 19 12:49:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src26.csv
[Sun May 19 12:49:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 12:49:05 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun May 19 12:49:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May 19 12:49:05 2013] fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun May 19 12:49:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May 19 12:49:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:24:33 2013] Spatial fit model total counts = 173.372000, observed total counts = 139.000000
[Sun May 19 14:24:33 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:24:33 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:24:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:24:33 2013] Assessing source extent using major
[Sun May 19 14:24:33 2013] Source does appear to be extended
[Sun May 19 14:24:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:24:33 2013] Deleting source due to low Poisson probability 0.9