[Tue Jul 17 10:17:37 2012] Detection parameters:
  Position = (316.2, 314.1) = 0 37 6.84 9 9 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2973.2 +/- 67.2
  Background counts = 61.5
  Rate = 0.1 +/- 0.003

[Tue Jul 17 10:17:39 2012] Off-axis axis estimate = 1.72'
[Tue Jul 17 10:20:41 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 10:20:41 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jul 17 10:20:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue Jul 17 10:20:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jul 17 12:14:34 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 17 12:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 12:14:34 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 17 12:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 12:14:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 12:14:35 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 17 12:14:35 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 17 12:14:35 2012] Fit fullrun_pn_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 17 16:42:59 2012] Spatial fit model total counts = 9987.110000, observed total counts = 9649.000000
[Tue Jul 17 16:42:59 2012] Offset between fit and detection position for source 1 = 0.919072 pixels
[Tue Jul 17 16:42:59 2012] 9985.140000 total counts/ 7096.740000 bgd. counts: snr = 34.286874
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.919072 pixels
  Position = (316.6, 314.9) = 0 37 6.72 9 9 27.9
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 2888.4 +/- 99.9
  Background counts = 7096.7
  Rate = 0.1 +/- 0.004
[Tue Jul 17 16:43:00 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 16:43:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 16:43:00 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 16:43:00 2012] Source does appear to be extended
[Tue Jul 17 16:43:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 16:43:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:43:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 16:43:34 2012] Initial guess for spatial extent in simple fitting = 14.57"
[Tue Jul 17 16:43:34 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.944
[Tue Jul 17 16:43:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.57"
[Tue Jul 17 18:16:33 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 17 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_src1.csv
[Tue Jul 17 18:16:33 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 17 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_src1.csv
[Tue Jul 17 18:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 18:16:33 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 17 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 17 18:16:33 2012] fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 17 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 17 18:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:26:11 2012] Spatial fit model total counts = 19263.900000, observed total counts = 17254.000000
[Tue Jul 17 21:26:11 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 21:26:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:26:11 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 21:26:11 2012] Source does appear to be extended
[Tue Jul 17 21:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 21:26:39 2012] Counts = 2888.400000, rescaling region sizes by 2.000000
[Tue Jul 17 21:26:39 2012] XMMSAS src. selection expression = ellipse(27499.716000, 27346.262160, 1748.952050, 1748.952050, 0.000000, X, Y)
[Tue Jul 17 21:26:39 2012] Writing source region out to fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 17 21:26:39 2012] Extracting stamp from image fullrun_pn_xmm0084230201_pi300-10000_cl_sm2.00.img.gz, (216, 214) - (417, 415)
[Tue Jul 17 21:26:39 2012] XMMSAS bgd. selection expression = annulus(27499.716000, 27346.262160, 5829.840168, 11659.680336, X, Y) && !ellipse(28119.035034, 28360.722351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19395.711929, 35364.381653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29203.423340, 37613.995941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29646.428253, 31869.476318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28629.506897, 29463.751617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26753.811500, 29284.452800, 366.239211, 366.239211, 0.000000, X, Y) && !ellipse(28827.131348, 28072.096771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23060.051941, 27611.658936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39042.027344, 27465.770386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15379.184937, 25863.210632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27344.324036, 25456.683167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28894.494800, 24967.251200, 378.924811, 378.924811, 0.000000, X, Y) && !ellipse(16478.458664, 24934.247742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26291.841217, 25630.545105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.056200, 24656.191200, 419.367212, 419.367212, 0.000000, X, Y) && !ellipse(30854.740051, 24411.817627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.975800, 22573.321800, 383.312011, 383.312011, 0.000000, X, Y) && !ellipse(31554.192000, 22445.851200, 433.893726, 433.893726, 0.000000, X, Y) && !ellipse(29291.174713, 20734.331238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.191617, 20504.667924, 559.738804, 426.342008, 4.776722, X, Y) && !ellipse(22607.823456, 20320.980347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20593.630615, 38764.927246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33877.074066, 16966.349503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32507.933868, 35990.843781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23447.441956, 35437.896759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21213.687485, 30973.778290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27473.586400, 30744.630600, 444.839620, 444.839620, 0.000000, X, Y) && !ellipse(38851.847595, 18953.094650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30133.801361, 19089.454300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29932.576691, 28591.229340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34488.227340, 28464.230400, 447.444552, 447.444552, 0.000000, X, Y) && !ellipse(22285.695800, 27144.417000, 376.049611, 376.049611, 0.000000, X, Y) && !ellipse(29715.724518, 26916.075775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28991.193573, 25691.170044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33188.048828, 19441.908112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22141.285040, 25709.596400, 305.495209, 305.495209, 0.000000, X, Y) && !ellipse(26720.838196, 24332.546417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17990.100922, 23850.002808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36438.006470, 22837.454285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24093.023400, 20467.313000, 431.537612, 431.537612, 0.000000, X, Y)
[Tue Jul 17 21:26:39 2012] Writing fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1.gif
[Tue Jul 17 21:26:52 2012] Mean detx,y = (-28.43, -365.65) 
[Tue Jul 17 21:26:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 21:32:23 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 21:32:24 2012] Setting source spectrum file to fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 17 21:32:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 01:54:23 2012] Updating aperture counts using extracted products
[Wed Jul 18 01:54:23 2012] Error reading totcts from fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 01:54:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 01:54:24 2012] Using photon index=1.80, rate=0.12, arf fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 01:54:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 01:54:24 2012] Updating source flux to 2.8e-13
[Wed Jul 18 01:56:09 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jul 18 01:56:58 2012] Reading fit data from xmm0084230201/analysis//spectral/fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 18 01:56:58 2012] Spectral fit parameter nH value = 1.49465e+21
[Wed Jul 18 01:56:58 2012] Spectral fit parameter PhoIndex value = 1.94505
[Wed Jul 18 01:56:58 2012] Failed to get F(0.3-8.0) from xmm0084230201/analysis//spectral/fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 01:56:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 01:56:58 2012] Using Nh = 1.5e+21, photon index=1.95, rate=0.12, arf fullrun_pn_xmm0084230201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 01:56:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 01:56:58 2012] Updating source flux to 3.4e-13