[Tue Jul 17 10:18:52 2012] Detection parameters:
  Position = (261.0, 233.1) = 0 37 23.06 9 3 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.3 +/- 15.7
  Background counts = 11.3
  Rate = 0.008 +/- 0.0008

[Tue Jul 17 10:18:53 2012] Off-axis axis estimate = 5.46'
[Tue Jul 17 14:36:41 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 14:36:41 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue Jul 17 14:36:41 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.105
[Tue Jul 17 14:36:41 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.16"
[Tue Jul 17 16:42:45 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jul 17 16:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_src5.csv
[Tue Jul 17 16:42:45 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jul 17 16:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_src5.csv
[Tue Jul 17 16:42:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 16:42:46 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jul 17 16:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jul 17 16:42:46 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jul 17 16:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jul 17 16:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 16:43:21 2012] Spatial fit model total counts = 380.764000, observed total counts = 240.000000
[Tue Jul 17 16:43:21 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 16:43:21 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 16:43:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 16:43:21 2012] Assessing source extent using major
[Tue Jul 17 16:43:21 2012] Source does appear to be extended
[Tue Jul 17 16:43:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 19:59:42 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 19:59:42 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue Jul 17 19:59:42 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.105
[Tue Jul 17 19:59:42 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.16"
[Tue Jul 17 21:25:59 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jul 17 21:25:59 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jul 17 21:25:59 2012] Fit fullrun_mos2_xmm0084230201_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue Jul 17 21:25:59 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jul 17 21:25:59 2012] fullrun_mos2_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jul 17 21:25:59 2012] Fit fullrun_mos2_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Jul 17 21:26:25 2012] Spatial fit model total counts = 235.011000, observed total counts = 240.000000
[Tue Jul 17 21:26:25 2012] Offset between fit and detection position for source 28 = 0.097859 pixels
[Tue Jul 17 21:26:25 2012] 235.389400 total counts/ 140.996000 bgd. counts: snr = 7.949471
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.097859 pixels
  Position = (261.0, 233.0) = 0 37 23.05 9 3 31.8
  Extent = 4.6 (3.8-5.5)", rotation angle = 0
  Source counts = 94.4 +/- 15.3
  Background counts = 141.0
  Rate = 0.003 +/- 0.0005
[Tue Jul 17 21:26:26 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:26:26 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 21:26:26 2012] Source does appear to be extended
[Tue Jul 17 21:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 01:17:48 2012] XMMSAS src. selection expression = ellipse(22662.157760, 20223.288200, 274.789808, 274.789808, 0.000000, X, Y)
[Wed Jul 18 01:17:48 2012] Writing source region out to fullrun_mos2_xmm0084230201_pi300-10000_pass1_cl_src28_src.reg
[Wed Jul 18 01:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0084230201_pi300-10000_cl_sm2.00.img.gz, (245, 217) - (277, 249)
[Wed Jul 18 01:17:48 2012] XMMSAS bgd. selection expression = annulus(22662.157760, 20223.288200, 457.983013, 915.966026, X, Y) && !ellipse(24175.458954, 20359.911041, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 01:17:48 2012] Writing fullrun_mos2_xmm0084230201_pi300-10000_pass1_cl_src28.gif
[Wed Jul 18 01:26:20 2012] Mean detx,y = (2287.85, -8092.94) 
[Wed Jul 18 01:26:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 01:26:28 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 01:26:28 2012] Setting source spectrum file to fullrun_mos2_xmm0084230201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Jul 18 01:26:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Jul 18 01:42:34 2012] Not generating rmf since there are only 94 counts
[Wed Jul 18 01:42:34 2012] rmf not generated due to insufficient counts
[Wed Jul 18 01:54:26 2012] Updating aperture counts using extracted products
[Wed Jul 18 01:54:26 2012] Error reading totcts from fullrun_mos2_xmm0084230201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Jul 18 01:54:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 01:54:26 2012] Using photon index=1.80, rate=0.00326, arf fullrun_mos2_xmm0084230201_pi300-10000_pass1_cl_src28.arf
[Wed Jul 18 01:54:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 01:54:26 2012] Updating source flux to 5.9e-14
[Wed Jul 18 01:55:34 2012] Flag p found in src. 28 procflags, skipping spectral fitting
[Wed Jul 18 01:55:34 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting