[Tue Jul 17 10:18:16 2012] Detection parameters:
  Position = (310.7, 281.0) = 0 37 8.48 9 6 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.0 +/- 10.5
  Background counts = 18.0
  Rate = 0.001 +/- 0.0004

[Tue Jul 17 10:18:16 2012] Off-axis axis estimate = 1.54'
[Tue Jul 17 12:14:36 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 12:14:36 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Tue Jul 17 12:14:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Tue Jul 17 12:14:36 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 7.20"
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src47.ximg exists
[Tue Jul 17 14:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src47.csv
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src47_1.ximg exists
[Tue Jul 17 14:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src47.csv
[Tue Jul 17 14:36:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:36:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Tue Jul 17 14:36:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Tue Jul 17 14:36:41 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Tue Jul 17 16:43:11 2012] Spatial fit model total counts = 442.241000, observed total counts = 442.000000
[Tue Jul 17 16:43:11 2012] Offset between fit and detection position for source 45 = 0.628433 pixels
[Tue Jul 17 16:43:11 2012] Warning, changing simple spatial fit ID from 47 to 45
[Tue Jul 17 16:43:11 2012] 457.451810 total counts/ 449.045000 bgd. counts: snr = 0.396722
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.628433 pixels
  Position = (310.7, 280.4) = 0 37 8.46 9 6 57.9
  Extent = 1.8 (1.8-3.2)", rotation angle = 0
  Source counts = 8.4 +/- 21.4
  Background counts = 449.0
  Rate = 0.0003 +/- 0.0007
  Deleting source due to low Poisson probability