[Tue Jul 17 10:18:16 2012] Detection parameters:
  Position = (291.1, 300.9) = 0 37 14.24 9 8 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.8 +/- 9.9
  Background counts = 17.8
  Rate = 0.001 +/- 0.0004

[Tue Jul 17 10:18:16 2012] Off-axis axis estimate = 0.56'
[Tue Jul 17 12:14:36 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 12:14:36 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Tue Jul 17 12:14:36 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959
[Tue Jul 17 12:14:36 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 6.71"
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src50.ximg exists
[Tue Jul 17 14:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src50.csv
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src50_1.ximg exists
[Tue Jul 17 14:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src50.csv
[Tue Jul 17 14:36:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:36:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Tue Jul 17 14:36:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Tue Jul 17 14:36:41 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Tue Jul 17 16:43:11 2012] Source 37 is offset by -4.354208 and 1.333759 pixels which is larger than
2 X fitted extent = 1.441338 x 1.441338, not incorporating fit results
[Tue Jul 17 16:43:11 2012] Source 37 is offset by -4.084599 and 1.510702 pixels which is larger than
2 X fitted extent = 1.255416 x 1.255416, not incorporating fit results
[Tue Jul 17 16:43:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 16:43:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 16:43:11 2012] Assessing source extent using major
[Tue Jul 17 16:43:11 2012] Source does appear to be extended
[Tue Jul 17 16:43:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 18:16:34 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 18:16:34 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Tue Jul 17 18:16:34 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959
[Tue Jul 17 18:16:34 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 6.71"
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src40.ximg exists
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Jul 17 19:59:41 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src40 appears to have run properly
[Tue Jul 17 19:59:42 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Jul 17 19:59:42 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Jul 17 19:59:42 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Jul 17 21:26:19 2012] Spatial fit model total counts = 819.098000, observed total counts = 819.000000
[Tue Jul 17 21:26:19 2012] Offset between fit and detection position for source 37 = 1.962135 pixels
[Tue Jul 17 21:26:19 2012] Warning, changing simple spatial fit ID from 40 to 10
[Tue Jul 17 21:26:19 2012] 872.941500 total counts/ 793.312000 bgd. counts: snr = 2.827170
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 1.962135 pixels
  Position = (292.6, 299.7) = 0 37 13.79 9 8 21.8
  Extent = 13.2 (13.2-26.4)", rotation angle = 0
  Source counts = 79.6 +/- 29.5
  Background counts = 793.3
  Rate = 0.003 +/- 0.001
[Tue Jul 17 21:26:19 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:26:19 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 21:26:19 2012] Source does appear to be extended
[Tue Jul 17 21:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 21:26:19 2012] Source is confused with source 14
[Wed Jul 18 00:08:15 2012] XMMSAS src. selection expression = ellipse(25406.346000, 26023.976000, 791.586023, 791.586023, 0.000000, X, Y)
[Wed Jul 18 00:08:15 2012] Writing source region out to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src37_src.reg
[Wed Jul 18 00:08:15 2012] Extracting stamp from image fullrun_mos1_xmm0084230201_pi300-10000_cl_sm2.00.img.gz, (247, 254) - (338, 345)
[Wed Jul 18 00:08:16 2012] XMMSAS bgd. selection expression = annulus(25406.346000, 26023.976000, 1319.310038, 2638.620076, X, Y) && !ellipse(27474.469600, 27229.020200, 1170.072034, 1170.072034, 0.000000, X, Y) && !ellipse(26270.422000, 27286.498000, 588.968017, 588.968017, 0.000000, X, Y) && !ellipse(28368.670000, 28879.632000, 1303.736038, 1303.736038, 0.000000, X, Y) && !ellipse(28873.382000, 29268.738000, 1290.056037, 1290.056037, 0.000000, X, Y) && !ellipse(25917.402435, 26318.657013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.790192, 25710.907532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28729.351929, 26074.412903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23074.864880, 27594.894000, 411.644812, 411.644812, 0.000000, X, Y) && !ellipse(25330.483600, 24631.225000, 258.760807, 258.760807, 0.000000, X, Y) && !ellipse(25854.698608, 27610.164154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.634216, 25277.410278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.386047, 29111.944305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.560242, 29428.338837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25904.512268, 25454.800751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.008270, 28629.737885, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 00:08:16 2012] Writing fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src37.gif
[Wed Jul 18 00:20:56 2012] Mean detx,y = (-1365.11, -1763.71) 
[Wed Jul 18 00:20:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 00:21:06 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 00:21:06 2012] Setting source spectrum file to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Jul 18 00:21:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Wed Jul 18 01:17:45 2012] Not generating rmf since there are only 79 counts
[Wed Jul 18 01:17:45 2012] rmf not generated due to insufficient counts
[Wed Jul 18 01:54:25 2012] Updating aperture counts using extracted products
[Wed Jul 18 01:54:25 2012] Error reading totcts from fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Jul 18 01:54:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 01:54:26 2012] Using photon index=1.80, rate=0.00275, arf fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src37.arf
[Wed Jul 18 01:54:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 01:54:26 2012] Updating source flux to 2.8e-14
[Wed Jul 18 01:54:29 2012] Flag b found in src. 37 procflags, skipping spectral fitting
[Wed Jul 18 01:54:29 2012] Flag c found in src. 37 procflags, skipping spectral fitting
[Wed Jul 18 01:54:29 2012] Source 37 has fewer than 100.000000 counts, skipping spectral fitting