[Tue Jul 17 10:18:16 2012] Detection parameters: Position = (346.9, 313.0) = 0 36 57.82 9 9 19.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 46.8 +/- 11.7 Background counts = 25.4 Rate = 0.002 +/- 0.0004 [Tue Jul 17 10:18:16 2012] Off-axis axis estimate = 3.67' [Tue Jul 17 12:14:36 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting [Tue Jul 17 12:14:36 2012] Initial guess for spatial extent in simple fitting = 8.26" [Tue Jul 17 12:14:36 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.695 [Tue Jul 17 12:14:36 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.26" [Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src43.ximg exists [Tue Jul 17 14:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src43.csv [Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src43_1.ximg exists [Tue Jul 17 14:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src43.csv [Tue Jul 17 14:36:40 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src43_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 17 14:36:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists [Tue Jul 17 14:36:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists [Tue Jul 17 14:36:41 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly [Tue Jul 17 16:43:11 2012] Spatial fit model total counts = 578.017000, observed total counts = 562.000000 [Tue Jul 17 16:43:11 2012] Offset between fit and detection position for source 36 = 0.349011 pixels [Tue Jul 17 16:43:11 2012] Warning, changing simple spatial fit ID from 43 to 36 [Tue Jul 17 16:43:11 2012] 563.024800 total counts/ 539.688000 bgd. counts: snr = 1.004546 Spatial fit parameters: Offset between fit and detection position for source 36 = 0.349011 pixels Position = (346.9, 312.6) = 0 36 57.85 9 9 18.1 Extent = 6.6 (2.1-11.7)", rotation angle = 0 Source counts = 23.3 +/- 23.7 Background counts = 539.7 Rate = 0.0008 +/- 0.0008 Deleting source due to low Poisson probability