[Tue Jul 17 10:18:14 2012] Detection parameters:
  Position = (303.1, 314.0) = 0 37 10.70 9 9 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.1 +/- 22.8
  Background counts = 21.5
  Rate = 0.01 +/- 0.0008

[Tue Jul 17 10:18:16 2012] Off-axis axis estimate = 1.18'
[Tue Jul 17 12:14:36 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 12:14:36 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Tue Jul 17 12:14:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.896
[Tue Jul 17 12:14:36 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.02"
[Tue Jul 17 14:36:39 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 17 14:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src3.csv
[Tue Jul 17 14:36:39 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 17 14:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src3.csv
[Tue Jul 17 14:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 17 14:36:40 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jul 17 16:43:11 2012] Source 12 is offset by -6.189625 and 3.969211 pixels which is larger than
2 X fitted extent = 2.200598 x 2.200598, not incorporating fit results
[Tue Jul 17 16:43:11 2012] Source 12 is offset by -0.332269 and 5.423717 pixels which is larger than
2 X fitted extent = 3.046773 x 3.046773, not incorporating fit results
[Tue Jul 17 16:43:11 2012] Spatial fit model total counts = 742.072000, observed total counts = 743.000000
[Tue Jul 17 16:43:11 2012] Offset between fit and detection position for source 12 = 0.472152 pixels
[Tue Jul 17 16:43:11 2012] Warning, changing simple spatial fit ID from 3 to 21
[Tue Jul 17 16:43:11 2012] 737.378400 total counts/ 645.422000 bgd. counts: snr = 3.619596
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.472152 pixels
  Position = (303.1, 314.5) = 0 37 10.71 9 9 26.1
  Extent = 9.6 (4.1-14.3)", rotation angle = 0
  Source counts = 92.0 +/- 27.2
  Background counts = 645.4
  Rate = 0.003 +/- 0.0009
[Tue Jul 17 16:43:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 16:43:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 16:43:11 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 16:43:11 2012] Source does appear to be extended
[Tue Jul 17 16:43:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 16:43:12 2012] Source is confused with source 32
[Tue Jul 17 18:16:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 18:16:34 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Tue Jul 17 18:16:34 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.027
[Tue Jul 17 18:16:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.58"
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jul 17 19:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src3.csv
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jul 17 19:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src3.csv
[Tue Jul 17 19:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jul 17 19:59:41 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jul 17 21:26:19 2012] Warning, spatial fit 3 centroid is now closest to src. 32
[Tue Jul 17 21:26:19 2012] Spatial fit model total counts = 742.999000, observed total counts = 743.000000
[Tue Jul 17 21:26:19 2012] Offset between fit and detection position for source 12 = 0.610535 pixels
[Tue Jul 17 21:26:19 2012] Warning, changing simple spatial fit ID from 3 to 20
[Tue Jul 17 21:26:19 2012] 729.105700 total counts/ 655.239000 bgd. counts: snr = 2.885684
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.610535 pixels
  Position = (302.5, 314.2) = 0 37 10.87 9 9 24.9
  Extent = 7.4 (3.7-14.3)", rotation angle = 0
  Source counts = 73.9 +/- 27.0
  Background counts = 655.2
  Rate = 0.003 +/- 0.0009
[Tue Jul 17 21:26:19 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:26:19 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 21:26:19 2012] Source does appear to be extended
[Tue Jul 17 21:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 00:08:15 2012] XMMSAS src. selection expression = ellipse(26270.422000, 27286.498000, 441.726013, 441.726013, 0.000000, X, Y)
[Wed Jul 18 00:08:15 2012] Writing source region out to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src12_src.reg
[Wed Jul 18 00:08:15 2012] Extracting stamp from image fullrun_mos1_xmm0084230201_pi300-10000_cl_sm2.00.img.gz, (277, 289) - (328, 340)
[Wed Jul 18 00:08:15 2012] XMMSAS bgd. selection expression = annulus(26270.422000, 27286.498000, 736.210021, 1472.420042, X, Y) && !ellipse(27474.469600, 27229.020200, 1170.072034, 1170.072034, 0.000000, X, Y) && !ellipse(28368.670000, 28879.632000, 1303.736038, 1303.736038, 0.000000, X, Y) && !ellipse(28873.382000, 29268.738000, 1290.056037, 1290.056037, 0.000000, X, Y) && !ellipse(25917.402435, 26318.657013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.790192, 25710.907532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.698608, 27610.164154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.634216, 25277.410278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.386047, 29111.944305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.560242, 29428.338837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25904.512268, 25454.800751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.008270, 28629.737885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25406.346000, 26023.976000, 1055.448030, 1055.448030, 0.000000, X, Y)
[Wed Jul 18 00:08:15 2012] Writing fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src12.gif
[Wed Jul 18 00:13:18 2012] Mean detx,y = (17.52, -1443.90) 
[Wed Jul 18 00:13:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 00:13:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 00:13:27 2012] Setting source spectrum file to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 18 00:13:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jul 18 00:46:58 2012] Not generating rmf since there are only 73 counts
[Wed Jul 18 00:46:58 2012] rmf not generated due to insufficient counts
[Wed Jul 18 01:54:25 2012] Updating aperture counts using extracted products
[Wed Jul 18 01:54:25 2012] Error reading totcts from fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 18 01:54:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 01:54:25 2012] Using photon index=1.80, rate=0.00255, arf fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src12.arf
[Wed Jul 18 01:54:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 01:54:25 2012] Updating source flux to 2.9e-14
[Wed Jul 18 01:54:29 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Wed Jul 18 01:54:29 2012] Flag c found in src. 12 procflags, skipping spectral fitting
[Wed Jul 18 01:54:29 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting