[Tue Jul 17 10:18:14 2012] Detection parameters:
  Position = (330.2, 330.4) = 0 37 2.74 9 10 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.0 +/- 23.6
  Background counts = 26.8
  Rate = 0.008 +/- 0.0009

[Tue Jul 17 10:18:16 2012] Off-axis axis estimate = 3.27'
[Tue Jul 17 12:14:36 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 12:14:36 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Tue Jul 17 12:14:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.948
[Tue Jul 17 12:14:36 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.06"
[Tue Jul 17 14:36:39 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jul 17 14:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src5.csv
[Tue Jul 17 14:36:39 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jul 17 14:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src5.csv
[Tue Jul 17 14:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jul 17 14:36:40 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jul 17 14:36:40 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jul 17 16:43:11 2012] Warning, spatial fit 5 centroid is now closest to src. 8
[Tue Jul 17 16:43:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 16:43:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 16:43:11 2012] Assessing source extent using major
[Tue Jul 17 16:43:11 2012] Source does appear to be extended
[Tue Jul 17 16:43:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 16:43:12 2012] Source is confused with source 8
[Tue Jul 17 18:16:34 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 18:16:34 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Tue Jul 17 18:16:34 2012] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.948
[Tue Jul 17 18:16:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.06"
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jul 17 19:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src5.csv
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jul 17 19:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src5.csv
[Tue Jul 17 19:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jul 17 19:59:41 2012] fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jul 17 19:59:41 2012] Fit fullrun_mos1_xmm0084230201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jul 17 21:26:19 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 19.361564 pixels away
[Tue Jul 17 21:26:19 2012] Spatial fit model total counts = 1567.570000, observed total counts = 1534.000000
[Tue Jul 17 21:26:19 2012] Offset between fit and detection position for source 10 = 6.916888 pixels
[Tue Jul 17 21:26:19 2012] 1246.627000 total counts/ 855.999000 bgd. counts: snr = 13.351398
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.916888 pixels
  Position = (332.4, 337.0) = 0 37 2.08 9 11 4.1
  Extent = 16.1 (16.0-32.3)", rotation angle = 0
  Source counts = 390.6 +/- 35.3
  Background counts = 856.0
  Rate = 0.01 +/- 0.001
[Tue Jul 17 21:26:19 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:26:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:26:19 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 21:26:19 2012] Source does appear to be extended
[Tue Jul 17 21:26:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 00:08:15 2012] XMMSAS src. selection expression = ellipse(28873.382000, 29268.738000, 967.542028, 967.542028, 0.000000, X, Y)
[Wed Jul 18 00:08:15 2012] Writing source region out to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src10_src.reg
[Wed Jul 18 00:08:15 2012] Extracting stamp from image fullrun_mos1_xmm0084230201_pi300-10000_cl_sm2.00.img.gz, (277, 281) - (388, 393)
[Wed Jul 18 00:08:15 2012] XMMSAS bgd. selection expression = annulus(28873.382000, 29268.738000, 1612.570046, 3225.140093, X, Y) && !ellipse(27474.469600, 27229.020200, 1170.072034, 1170.072034, 0.000000, X, Y) && !ellipse(26270.422000, 27286.498000, 588.968017, 588.968017, 0.000000, X, Y) && !ellipse(28368.670000, 28879.632000, 1303.736038, 1303.736038, 0.000000, X, Y) && !ellipse(28647.691460, 29463.230200, 279.144008, 279.144008, 0.000000, X, Y) && !ellipse(29653.641600, 31826.411400, 383.610411, 383.610411, 0.000000, X, Y) && !ellipse(25917.402435, 26318.657013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.790192, 25710.907532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28729.351929, 26074.412903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.698608, 27610.164154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.634216, 25277.410278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.386047, 29111.944305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29792.983215, 28293.929779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29992.726379, 27649.551514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.560242, 29428.338837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25904.512268, 25454.800751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27515.078000, 30152.334000, 1303.736038, 1303.736038, 0.000000, X, Y) && !ellipse(26042.008270, 28629.737885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25406.346000, 26023.976000, 1055.448030, 1055.448030, 0.000000, X, Y)
[Wed Jul 18 00:08:15 2012] Writing fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src10.gif
[Wed Jul 18 00:13:46 2012] Mean detx,y = (2527.32, 237.42) 
[Wed Jul 18 00:13:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 00:13:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 00:13:58 2012] Setting source spectrum file to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul 18 00:13:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jul 18 01:54:25 2012] Updating aperture counts using extracted products
[Wed Jul 18 01:54:25 2012] Error reading totcts from fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul 18 01:54:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 01:54:25 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos1_xmm0084230201_pi300-10000_pass1_cl_src10.arf
[Wed Jul 18 01:54:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 01:54:25 2012] Updating source flux to 1.3e-13
[Wed Jul 18 01:54:29 2012] Flag c found in src. 10 procflags, skipping spectral fitting