[Thu Aug  2 07:33:51 2012] Detection parameters:
  Position = (242.8, 423.1) = 0 55 51.21 -73 31 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.4 +/- 16.8
  Background counts = 11.4
  Rate = 0.009 +/- 0.0008

[Thu Aug  2 07:33:51 2012] Off-axis axis estimate = 9.90'
[Thu Aug  2 07:46:31 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 07:46:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 07:46:31 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Thu Aug  2 07:46:31 2012] source mask rpix=2.6, npix_max = 38, mask sum = 34, frac = 0.876
[Thu Aug  2 07:46:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.38"
[Thu Aug  2 08:00:01 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 08:00:01 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 08:00:01 2012] Fit fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Aug  2 08:00:01 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 08:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  2 08:00:01 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 08:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  2 08:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084200801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 08:17:28 2012] Spatial fit model total counts = 355.128000, observed total counts = 382.000000
[Thu Aug  2 08:17:28 2012] Offset between fit and detection position for source 6 = 0.195724 pixels
[Thu Aug  2 08:17:28 2012] 351.757000 total counts/ 242.492000 bgd. counts: snr = 7.016691
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.195724 pixels
  Position = (242.8, 423.3) = 0 55 51.19 -73 31 8.9
  Extent = 8.2" x 4.3", rotation angle = 333
  Source counts = 109.3 +/- 18.8
  Background counts = 242.5
  Rate = 0.005 +/- 0.0009
[Thu Aug  2 08:17:28 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 08:17:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 08:17:28 2012] Assessing source extent using major
[Thu Aug  2 08:17:28 2012] Source does appear to be extended
[Thu Aug  2 08:17:28 2012] Computing asymmetry using major and minor axis, asym = 1.89
[Thu Aug  2 08:17:28 2012] Source is asymmetric
[Thu Aug  2 08:27:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 08:27:01 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Thu Aug  2 08:27:01 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.070
[Thu Aug  2 08:27:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.24"
[Thu Aug  2 08:39:46 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  2 08:39:46 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  2 08:39:46 2012] Fit fullrun_mos1_xmm0084200801_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Aug  2 08:39:47 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  2 08:39:47 2012] fullrun_mos1_xmm0084200801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  2 08:39:47 2012] Fit fullrun_mos1_xmm0084200801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  2 08:54:41 2012] Spatial fit model total counts = 282.032000, observed total counts = 280.000000
[Thu Aug  2 08:54:41 2012] Offset between fit and detection position for source 6 = 0.028623 pixels
[Thu Aug  2 08:54:41 2012] 282.895000 total counts/ 155.662000 bgd. counts: snr = 10.197846
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.028623 pixels
  Position = (242.8, 423.2) = 0 55 51.21 -73 31 8.9
  Extent = 8.0 (6.2-10.2)" x 4.1 (3.4-5.2)", rotation angle = 333 (320-346) degrees
  Source counts = 127.2 +/- 16.8
  Background counts = 155.7
  Rate = 0.006 +/- 0.0008
[Thu Aug  2 08:54:41 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 08:54:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 08:54:41 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 08:54:41 2012] Source does appear to be extended
[Thu Aug  2 08:54:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19
[Thu Aug  2 09:02:18 2012] XMMSAS src. selection expression = ellipse(21073.477900, 36773.977600, 477.609614, 248.723407, 333.254585, X, Y)
[Thu Aug  2 09:02:18 2012] Writing source region out to fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6_src.reg
[Thu Aug  2 09:02:18 2012] Extracting stamp from image fullrun_mos1_xmm0084200801_pi300-10000_cl_sm2.00.img.gz, (215, 396) - (270, 451)
[Thu Aug  2 09:02:18 2012] XMMSAS bgd. selection expression = annulus(21073.477900, 36773.977600, 796.016023, 1592.032046, X, Y)
[Thu Aug  2 09:02:18 2012] Writing fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6.gif
[Thu Aug  2 09:02:20 2012] Mean detx,y = (-4583.28, -12832.27) 
[Thu Aug  2 09:02:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 09:02:29 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 09:02:29 2012] Setting source spectrum file to fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Aug  2 09:02:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Aug  2 09:17:03 2012] Updating aperture counts using extracted products
[Thu Aug  2 09:17:03 2012] Error reading totcts from fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Aug  2 09:17:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 09:17:03 2012] Using photon index=1.80, rate=0.00609, arf fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6.arf
[Thu Aug  2 09:17:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 09:17:03 2012] Updating source flux to 1.8e-13
[Thu Aug  2 09:17:11 2012] Reading fit data from xmm0084200801/analysis//spectral/fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6_pl.csv
[Thu Aug  2 09:17:11 2012] Spectral fit parameter nH value = 1.17058e+21
[Thu Aug  2 09:17:11 2012] Spectral fit parameter PhoIndex value = 2.28529
[Thu Aug  2 09:17:11 2012] Failed to get F(0.3-8.0) from xmm0084200801/analysis//spectral/fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 09:17:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 09:17:11 2012] Using Nh = 1.2e+21, photon index=2.29, rate=0.00609, arf fullrun_mos1_xmm0084200801_pi300-10000_pass1_cl_src6.arf
[Thu Aug  2 09:17:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 09:17:11 2012] Updating source flux to 1.6e-13