[Thu Jun  6 01:12:13 2013] Detection parameters:
  Position = (226.8, 412.5) = 0 57 32.41 -72 12 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 440.1 +/- 39.2
  Background counts = 36.5
  Rate = 0.02 +/- 0.002

[Thu Jun  6 01:12:13 2013] Off-axis axis estimate = 9.77'
[Thu Jun  6 01:15:07 2013] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 01:15:07 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  6 01:15:07 2013] Initial guess for spatial extent in simple fitting = 11.31"
[Thu Jun  6 01:15:07 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.936
[Thu Jun  6 01:15:07 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.31"
[Thu Jun  6 01:47:31 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  6 01:47:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 01:47:31 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  6 01:47:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 01:47:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 01:47:31 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  6 01:47:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 01:47:31 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  6 01:47:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 01:47:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084200101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 02:31:45 2013] Spatial fit model total counts = 661.197000, observed total counts = 438.000000
[Thu Jun  6 02:31:45 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 02:31:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 02:31:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 02:31:45 2013] Assessing source extent using major
[Thu Jun  6 02:31:45 2013] Source does appear to be extended
[Thu Jun  6 02:31:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 02:31:57 2013] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 02:31:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  6 02:31:57 2013] Initial guess for spatial extent in simple fitting = 11.31"
[Thu Jun  6 02:31:57 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.936
[Thu Jun  6 02:31:57 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.31"
[Thu Jun  6 02:56:52 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  6 02:56:52 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  6 02:56:52 2013] Fit fullrun_pn_xmm0084200101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun  6 02:56:52 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  6 02:56:52 2013] fullrun_pn_xmm0084200101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  6 02:56:52 2013] Fit fullrun_pn_xmm0084200101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  6 03:34:32 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.229029 pixels away
[Thu Jun  6 03:34:32 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 03:34:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 03:34:32 2013] Assessing source extent using major
[Thu Jun  6 03:34:32 2013] Source does appear to be extended
[Thu Jun  6 03:34:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 03:34:43 2013] XMMSAS src. selection expression = ellipse(19679.368622, 35843.019714, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 03:34:43 2013] Writing source region out to fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  6 03:34:43 2013] Extracting stamp from image fullrun_pn_xmm0084200101_pi300-10000_cl_sm2.00.img.gz, (189, 375) - (264, 450)
[Thu Jun  6 03:34:43 2013] XMMSAS bgd. selection expression = annulus(19679.368622, 35843.019714, 1087.500000, 2175.000000, X, Y)
[Thu Jun  6 03:34:43 2013] Writing fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1.gif
[Thu Jun  6 03:34:50 2013] Mean detx,y = (8287.49, -5745.25) 
[Thu Jun  6 03:34:52 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 03:35:14 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 03:35:14 2013] Setting source spectrum file to fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  6 03:35:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun  6 03:45:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun  6 03:45:46 2013] rmf not generated due to insufficient counts
[Thu Jun  6 04:23:19 2013] Updating aperture counts using extracted products
[Thu Jun  6 04:23:19 2013] Total counts from fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 251.00
[Thu Jun  6 04:23:19 2013] Total counts from fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 719.00
[Thu Jun  6 04:23:19 2013] Got source and background scale factors 1151432.000000, 10711430.000000
[Thu Jun  6 04:23:19 2013] User source parameters:
  Position = (226.8, 412.5) = 0 57 32.41 -72 12 58.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 173.7 +/- 16.9
  Background aperture counts = 77.3
  Rate = 0.02 +/- 0.002

[Thu Jun  6 04:23:19 2013] Updating counts from extracted products
[Thu Jun  6 04:23:19 2013] Set source signif. to 173.71/8.79 = 19.76
[Thu Jun  6 04:23:23 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 04:23:23 2013] Using photon index=1.80, rate=0.0195, arf fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1.arf
[Thu Jun  6 04:23:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 04:23:23 2013] Updating source flux to 1.4e-13
[Thu Jun  6 04:23:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 04:23:36 2013] xmm0084200101/analysis//spectral/fullrun_pn_xmm0084200101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete