[Fri Aug 17 02:09:40 2012] Detection parameters:
  Position = (482.4, 409.7) = 2 7 39.57 35 30 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.5 +/- 11.1
  Background counts = 26.4
  Rate = 0.003 +/- 0.0007

[Fri Aug 17 02:09:41 2012] Off-axis axis estimate = 15.59'
[Fri Aug 17 02:11:18 2012] Using EEF radius (= 14.22 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 02:11:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 02:11:18 2012] Initial guess for spatial extent in simple fitting = 14.22"
[Fri Aug 17 02:11:18 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.985
[Fri Aug 17 02:11:18 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 14.22"
[Fri Aug 17 02:44:43 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src8.ximg exists
[Fri Aug 17 02:44:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src8.csv
[Fri Aug 17 02:44:43 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Aug 17 02:44:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src8.csv
[Fri Aug 17 02:44:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 02:44:44 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Aug 17 02:44:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Aug 17 02:44:44 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Aug 17 02:44:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Aug 17 02:44:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 03:39:17 2012] Warning, spatial fit 8 centroid is now closest to src. 6
[Fri Aug 17 03:39:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 03:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 03:39:17 2012] Assessing source extent using major
[Fri Aug 17 03:39:17 2012] Source does appear to be extended
[Fri Aug 17 03:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 03:39:34 2012] Using EEF radius (= 14.22 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 03:39:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 03:39:34 2012] Initial guess for spatial extent in simple fitting = 14.22"
[Fri Aug 17 03:39:34 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.985
[Fri Aug 17 03:39:34 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 14.22"
[Fri Aug 17 04:13:24 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src7.ximg exists
[Fri Aug 17 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src7.csv
[Fri Aug 17 04:13:24 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Aug 17 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src7.csv
[Fri Aug 17 04:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 04:13:25 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug 17 04:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Aug 17 04:13:25 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug 17 04:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Aug 17 04:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 05:01:49 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Fri Aug 17 05:01:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 05:01:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 05:01:49 2012] Assessing source extent using major
[Fri Aug 17 05:01:49 2012] Source does appear to be extended
[Fri Aug 17 05:01:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 05:02:05 2012] XMMSAS src. selection expression = ellipse(41922.561554, 35598.911011, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 05:02:05 2012] Writing source region out to fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src8_src.reg
[Fri Aug 17 05:02:05 2012] Extracting stamp from image fullrun_pn_xmm0084140501_pi300-10000_cl_sm2.00.img.gz, (445, 372) - (520, 447)
[Fri Aug 17 05:02:05 2012] XMMSAS bgd. selection expression = annulus(41922.561554, 35598.911011, 1087.500000, 2175.000000, X, Y) && !ellipse(39804.942047, 33872.581757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41414.947280, 36284.195480, 1087.832031, 347.812010, 50.901700, X, Y)
[Fri Aug 17 05:02:05 2012] Writing fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src8.gif
[Fri Aug 17 05:07:40 2012] Mean detx,y = (10431.67, -13180.89) 
[Fri Aug 17 05:07:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 05:08:11 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 05:08:12 2012] Setting source spectrum file to fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug 17 05:08:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Aug 17 05:49:31 2012] Not generating rmf since there are only 41 counts
[Fri Aug 17 05:49:31 2012] rmf not generated due to insufficient counts
[Fri Aug 17 06:24:53 2012] Updating aperture counts using extracted products
[Fri Aug 17 06:24:53 2012] Error reading totcts from fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug 17 06:24:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 06:24:53 2012] Using photon index=1.80, rate=0.00273, arf fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src8.arf
[Fri Aug 17 06:24:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 06:24:53 2012] Updating source flux to 2.1e-14
[Fri Aug 17 06:25:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting