[Fri Aug 17 02:09:40 2012] Detection parameters:
  Position = (298.4, 194.2) = 2 8 45.12 35 14 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 520.2 +/- 29.1
  Background counts = 34.6
  Rate = 0.06 +/- 0.004

[Fri Aug 17 02:09:41 2012] Off-axis axis estimate = 7.55'
[Fri Aug 17 02:11:18 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 02:11:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 02:11:18 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Fri Aug 17 02:11:18 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.926
[Fri Aug 17 02:11:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.21"
[Fri Aug 17 02:44:43 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 02:44:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 02:44:43 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 02:44:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 02:44:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 02:44:44 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 02:44:44 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 02:44:44 2012] Fit fullrun_pn_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 03:39:17 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.535315 pixels away
[Fri Aug 17 03:39:17 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.972364 pixels away
[Fri Aug 17 03:39:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 03:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 03:39:17 2012] Assessing source extent using major
[Fri Aug 17 03:39:17 2012] Source does appear to be extended
[Fri Aug 17 03:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 03:39:34 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 03:39:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 03:39:34 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Fri Aug 17 03:39:34 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.926
[Fri Aug 17 03:39:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.21"
[Fri Aug 17 04:13:24 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 04:13:24 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 04:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 04:13:25 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 04:13:25 2012] fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 04:13:25 2012] Fit fullrun_pn_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 17 05:01:49 2012] Spatial fit model total counts = 591.576000, observed total counts = 589.000000
[Fri Aug 17 05:01:49 2012] Offset between fit and detection position for source 1 = 0.170832 pixels
[Fri Aug 17 05:01:49 2012] 594.729000 total counts/ 275.665000 bgd. counts: snr = 19.217062
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.170832 pixels
  Position = (298.5, 194.4) = 2 8 45.09 35 14 37.1
  Extent = 6.1 (5.5-6.7)", rotation angle = 0
  Source counts = 319.1 +/- 24.4
  Background counts = 275.7
  Rate = 0.03 +/- 0.002
[Fri Aug 17 05:01:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 05:01:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 05:01:49 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 05:01:49 2012] Source does appear to be extended
[Fri Aug 17 05:01:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 05:02:05 2012] XMMSAS src. selection expression = ellipse(25921.420652, 16861.191660, 365.071811, 365.071811, 0.000000, X, Y)
[Fri Aug 17 05:02:05 2012] Writing source region out to fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 17 05:02:05 2012] Extracting stamp from image fullrun_pn_xmm0084140501_pi300-10000_cl_sm2.00.img.gz, (278, 173) - (319, 215)
[Fri Aug 17 05:02:05 2012] XMMSAS bgd. selection expression = annulus(25921.420652, 16861.191660, 608.453018, 1216.906035, X, Y)
[Fri Aug 17 05:02:05 2012] Writing fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1.gif
[Fri Aug 17 05:02:13 2012] Mean detx,y = (2084.59, 9960.84) 
[Fri Aug 17 05:02:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 05:02:28 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 05:02:28 2012] Setting source spectrum file to fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 05:02:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 17 06:24:53 2012] Updating aperture counts using extracted products
[Fri Aug 17 06:24:53 2012] Error reading totcts from fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 06:24:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 06:24:53 2012] Using photon index=1.80, rate=0.0257, arf fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1.arf
[Fri Aug 17 06:24:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 06:24:53 2012] Updating source flux to 1.3e-13
[Fri Aug 17 06:25:41 2012] Reading fit data from xmm0084140501/analysis//spectral/fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug 17 06:25:41 2012] Spectral fit parameter nH value = 7.98963e+20
[Fri Aug 17 06:25:41 2012] Spectral fit parameter PhoIndex value = 1.83086
[Fri Aug 17 06:25:41 2012] Failed to get F(0.3-8.0) from xmm0084140501/analysis//spectral/fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 06:25:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 06:25:41 2012] Using Nh = 8e+20, photon index=1.83, rate=0.0257, arf fullrun_pn_xmm0084140501_pi300-10000_pass1_cl_src1.arf
[Fri Aug 17 06:25:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 06:25:41 2012] Updating source flux to 1.5e-13