[Fri Aug 17 02:10:10 2012] Detection parameters:
  Position = (477.0, 416.9) = 2 7 41.49 35 30 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.5 +/- 10.6
  Background counts = 5.2
  Rate = 0.004 +/- 0.0006

[Fri Aug 17 02:10:10 2012] Off-axis axis estimate = 15.54'
[Fri Aug 17 03:09:13 2012] Using EEF radius (= 14.20 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 03:09:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 03:09:13 2012] Initial guess for spatial extent in simple fitting = 14.20"
[Fri Aug 17 03:09:13 2012] source mask rpix=3.3, npix_max = 56, mask sum = 62, frac = 1.094
[Fri Aug 17 03:09:13 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 14.20"
[Fri Aug 17 03:39:11 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 17 03:39:11 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 17 03:39:11 2012] Fit fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri Aug 17 03:39:11 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 17 03:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 17 03:39:11 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 17 03:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 17 03:39:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 03:39:25 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.928436 pixels away
[Fri Aug 17 03:39:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 03:39:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 03:39:25 2012] Assessing source extent using major
[Fri Aug 17 03:39:25 2012] Source does appear to be extended
[Fri Aug 17 03:39:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 04:33:30 2012] Using EEF radius (= 14.20 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:33:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 04:33:30 2012] Initial guess for spatial extent in simple fitting = 14.20"
[Fri Aug 17 04:33:30 2012] source mask rpix=3.3, npix_max = 56, mask sum = 62, frac = 1.094
[Fri Aug 17 04:33:30 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 14.20"
[Fri Aug 17 05:01:43 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug 17 05:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src11.csv
[Fri Aug 17 05:01:43 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug 17 05:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src11.csv
[Fri Aug 17 05:01:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 05:01:44 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug 17 05:01:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 17 05:01:44 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug 17 05:01:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 17 05:01:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 05:01:57 2012] Spatial fit model total counts = 186.240000, observed total counts = 140.000000
[Fri Aug 17 05:01:57 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 05:01:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 05:01:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 05:01:57 2012] Assessing source extent using major
[Fri Aug 17 05:01:57 2012] Source does appear to be extended
[Fri Aug 17 05:01:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 06:10:28 2012] XMMSAS src. selection expression = ellipse(41451.668213, 36221.111816, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 06:10:28 2012] Writing source region out to fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src8_src.reg
[Fri Aug 17 06:10:28 2012] Extracting stamp from image fullrun_mos2_xmm0084140501_pi300-10000_cl_sm2.00.img.gz, (440, 379) - (515, 454)
[Fri Aug 17 06:10:28 2012] XMMSAS bgd. selection expression = annulus(41451.668213, 36221.111816, 1087.500000, 2175.000000, X, Y) && !ellipse(39821.316800, 33732.073600, 694.767220, 278.432808, 46.356044, X, Y) && !ellipse(39465.908081, 34681.380676, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 06:10:28 2012] Writing fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src8.gif
[Fri Aug 17 06:15:34 2012] Mean detx,y = (-9608.73, 13448.74) 
[Fri Aug 17 06:15:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 06:15:54 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 06:15:54 2012] Setting source spectrum file to fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug 17 06:15:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Aug 17 06:23:18 2012] Not generating rmf since there are only 70 counts
[Fri Aug 17 06:23:18 2012] rmf not generated due to insufficient counts
[Fri Aug 17 06:24:54 2012] Updating aperture counts using extracted products
[Fri Aug 17 06:24:54 2012] Error reading totcts from fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug 17 06:24:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 06:24:54 2012] Using photon index=1.80, rate=0.00405, arf fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src8.arf
[Fri Aug 17 06:24:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 06:24:54 2012] Updating source flux to 1.3e-13
[Fri Aug 17 06:25:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting