[Fri Aug 17 02:10:10 2012] Detection parameters:
  Position = (433.5, 247.4) = 2 7 57.12 35 18 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.0 +/- 13.7
  Background counts = 6.4
  Rate = 0.01 +/- 0.001

[Fri Aug 17 02:10:10 2012] Off-axis axis estimate = 10.47'
[Fri Aug 17 03:09:13 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 03:09:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 03:09:13 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Aug 17 03:09:13 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.211
[Fri Aug 17 03:09:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.66"
[Fri Aug 17 03:39:10 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 17 03:39:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 03:39:10 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 17 03:39:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 03:39:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 03:39:11 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 17 03:39:11 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 17 03:39:11 2012] Fit fullrun_mos2_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 17 03:39:25 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.955188 pixels away
[Fri Aug 17 03:39:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 03:39:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 03:39:25 2012] Assessing source extent using major
[Fri Aug 17 03:39:25 2012] Source does appear to be extended
[Fri Aug 17 03:39:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 04:33:30 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:33:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 04:33:30 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Aug 17 04:33:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.211
[Fri Aug 17 04:33:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.66"
[Fri Aug 17 05:01:43 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 17 05:01:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 05:01:43 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 17 05:01:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 05:01:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 05:01:44 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 17 05:01:44 2012] fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 17 05:01:44 2012] Fit fullrun_mos2_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 17 05:01:56 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.377135 pixels away
[Fri Aug 17 05:01:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 05:01:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 05:01:57 2012] Assessing source extent using major
[Fri Aug 17 05:01:57 2012] Source does appear to be extended
[Fri Aug 17 05:01:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 06:10:28 2012] XMMSAS src. selection expression = ellipse(37663.286560, 21471.204086, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 06:10:28 2012] Writing source region out to fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src6_src.reg
[Fri Aug 17 06:10:28 2012] Extracting stamp from image fullrun_mos2_xmm0084140501_pi300-10000_cl_sm2.00.img.gz, (396, 210) - (471, 285)
[Fri Aug 17 06:10:28 2012] XMMSAS bgd. selection expression = annulus(37663.286560, 21471.204086, 1087.500000, 2175.000000, X, Y)
[Fri Aug 17 06:10:28 2012] Writing fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src6.gif
[Fri Aug 17 06:13:52 2012] Mean detx,y = (-11360.53, -1596.06) 
[Fri Aug 17 06:13:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 06:14:01 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 06:14:01 2012] Setting source spectrum file to fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 06:14:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Aug 17 06:22:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 17 06:22:38 2012] rmf not generated due to insufficient counts
[Fri Aug 17 06:24:54 2012] Updating aperture counts using extracted products
[Fri Aug 17 06:24:54 2012] Error reading totcts from fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 06:24:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 06:24:54 2012] Using photon index=1.80, rate=0.0124, arf fullrun_mos2_xmm0084140501_pi300-10000_pass1_cl_src6.arf
[Fri Aug 17 06:24:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 06:24:54 2012] Updating source flux to 2.2e-13
[Fri Aug 17 06:25:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting