[Fri Aug 17 02:09:54 2012] Detection parameters:
  Position = (433.4, 247.3) = 2 7 57.16 35 18 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.8 +/- 13.2
  Background counts = 6.6
  Rate = 0.01 +/- 0.001

[Fri Aug 17 02:09:55 2012] Off-axis axis estimate = 10.46'
[Fri Aug 17 02:44:44 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 02:44:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 02:44:44 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Aug 17 02:44:44 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Fri Aug 17 02:44:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.66"
[Fri Aug 17 03:09:12 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 17 03:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 03:09:12 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 17 03:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 03:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 03:09:13 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 17 03:09:13 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 17 03:09:13 2012] Fit fullrun_mos1_xmm0084140501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 17 03:39:21 2012] Spatial fit model total counts = 148.672000, observed total counts = 150.000000
[Fri Aug 17 03:39:21 2012] Offset between fit and detection position for source 1 = 0.149413 pixels
[Fri Aug 17 03:39:21 2012] 150.126200 total counts/ 71.300800 bgd. counts: snr = 9.335100
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.149413 pixels
  Position = (433.3, 247.4) = 2 7 57.20 35 18 27.1
  Extent = 4.8 (4.0-5.8)", rotation angle = 0
  Source counts = 78.8 +/- 12.3
  Background counts = 71.3
  Rate = 0.005 +/- 0.0007
[Fri Aug 17 03:39:21 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 03:39:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 03:39:21 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 03:39:21 2012] Source does appear to be extended
[Fri Aug 17 03:39:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 04:13:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:13:25 2012] Initial guess for spatial extent in simple fitting = 4.79"
[Fri Aug 17 04:13:25 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.877
[Fri Aug 17 04:13:25 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.79"
[Fri Aug 17 04:33:30 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 17 04:33:30 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 17 04:33:30 2012] Fit fullrun_mos1_xmm0084140501_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Aug 17 04:33:30 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 17 04:33:30 2012] fullrun_mos1_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 17 04:33:30 2012] Fit fullrun_mos1_xmm0084140501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 17 05:01:52 2012] Spatial fit model total counts = 148.674000, observed total counts = 150.000000
[Fri Aug 17 05:01:52 2012] Offset between fit and detection position for source 1 = 0.001616 pixels
[Fri Aug 17 05:01:52 2012] 150.132800 total counts/ 71.485200 bgd. counts: snr = 9.302023
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001616 pixels
  Position = (433.3, 247.4) = 2 7 57.20 35 18 27.1
  Extent = 4.8 (4.0-5.8)", rotation angle = 0
  Source counts = 78.6 +/- 12.3
  Background counts = 71.5
  Rate = 0.005 +/- 0.0007
[Fri Aug 17 05:01:52 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 05:01:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 05:01:52 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 05:01:52 2012] Source does appear to be extended
[Fri Aug 17 05:01:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 06:00:22 2012] XMMSAS src. selection expression = ellipse(37644.293200, 21473.683600, 285.897008, 285.897008, 0.000000, X, Y)
[Fri Aug 17 06:00:22 2012] Writing source region out to fullrun_mos1_xmm0084140501_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 17 06:00:22 2012] Extracting stamp from image fullrun_mos1_xmm0084140501_pi300-10000_cl_sm2.00.img.gz, (417, 231) - (450, 264)
[Fri Aug 17 06:00:22 2012] XMMSAS bgd. selection expression = annulus(37644.293200, 21473.683600, 476.495014, 952.990027, X, Y)
[Fri Aug 17 06:00:22 2012] Writing fullrun_mos1_xmm0084140501_pi300-10000_pass1_cl_src1.gif
[Fri Aug 17 06:00:57 2012] Mean detx,y = (-1456.07, 11179.65) 
[Fri Aug 17 06:00:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 06:01:07 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 06:01:07 2012] Setting source spectrum file to fullrun_mos1_xmm0084140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 06:01:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084140501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 17 06:09:00 2012] Not generating rmf since there are only 78 counts
[Fri Aug 17 06:09:00 2012] rmf not generated due to insufficient counts
[Fri Aug 17 06:24:53 2012] Updating aperture counts using extracted products
[Fri Aug 17 06:24:53 2012] Error reading totcts from fullrun_mos1_xmm0084140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 06:24:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 06:24:54 2012] Using photon index=1.80, rate=0.00453, arf fullrun_mos1_xmm0084140501_pi300-10000_pass1_cl_src1.arf
[Fri Aug 17 06:24:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 06:24:54 2012] Updating source flux to 1.1e-13
[Fri Aug 17 06:24:55 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting